Datasheet

MFR-1150 Single Output
23
Soldering & Desoldering Systems with Venturi
DxP
Desoldering Tips
The MFR-1150 Desolder System with Venturi Workstand
provides a compact and easy shop air option.
Key Features &Benefits
w Venturi workstand
w 2 in 1 Desolder hand-piece (Pistol or Pencil)
w MFR-H5-DS & MFR-WSDSX are compatible for use
with all MFR systems (available under MFR-UK5
upgrade kit)
w Uses DxP desolder cartridges and replaceable coil
assembly (MFR-HDCA)
MFR-H5-DS Desolder Hand-piece
Power Cord (3-wire) 183cm (72")
Solder Hand-piece cable length 152 cm (60"), burn proof, ESD safe
Hand piece connector 8 pin power connector
MFR-WSDSX Workstand
Input voltage 24V
Intput power 15W
Workstand dimensions 100mm x 200mm x 140mm (4" x 8" x 5.5")
Noise level < 55 dB
Recommended Air pressure input 550kPa (80PSI) - Shop air only
Vacuum suction force 0.85 bar (25" Hg)
MFR-PS1100 Power Supply
Input Line Voltage 100-240 VAC
Power Consumption 70 Watts max.
Input Line Frequency 50/60Hz *
Output Power 60 Watts Max *
Output Frequency 450 KHz
Dimensions W x D x H 90mm x 200mm x 152.5mm (3.5" x 8" x 6")
* RF SmartHeat Technology provides greater power. More details at www.metcal.com/smartheat
MFR-1150 System
Idle Tip temperature stability +/- 1.1°C (2°F) in still air
Ambient Operating Temperature 10 - 40°C (50 - 104°F)
Maximum Enclosure Temperature 55°C (131°F)
Tip to ground Potential <2mV
Tip to ground resistance <2 Ohms
Surface resistivity 10
5
– 10
9
Ohm
Approvals cTUVus, CE
Part No. Description
MFR-1150 Complete System
Includes:
MFR-PS1100 Power Supply
MFR-H5-DS Desolder hand-piece
MFR-WSDSX Workstand with venturi box for desolder hand-piece
MFR-FTKIT Fittings and air hose kit
AC-TC Desolder tip cleaner tool
Remove grip for Pencil config.
Collection chamber replacement
Technical Specifications
Full range on page 31
MFR-UK5 Upgrade Kit
Compatible with all MFR
Series Power Supplies
www.metcal.com