User Manual

Channel LED

· Green --- On / Ready

· Red ------ Open connection: tip, connector

· Off ------- Channel not selected or channel is in Auto Off

(cycle the power switch to reset)

AC Power LED

· Green --- Power On

· Red ------ Ground Fault

· Off ------- Power Off

Auto-Sleep and Auto Off Functions

To prolong tip life, MFR systems with a soldering hand-piece (MFR-H1-SC2, MFR-H2-

ST2) include an “Auto-Sleep Workstand” (WS1). When the hand-piece is placed into the

workstand, the “Auto-Sleep Workstand” immediately reduces power to the hand-piece.

All MFR systems have an “Auto Off” Function. The “Auto Off” Function will be engaged

when the hand-piece has been idle in the sleep stand for a period of two hours. The

channel LED indicator light will go from green to off. The “Auto Off” Function can be

reset by cycling the power switch.

LED Indications and Meaning

System Specifications

Ambient Operating Temperature 10- 40°C

Maximum Enclosure Temperature 55°C

Input Line Voltage 100- 240 VAC, grounded circuit

Input Line Frequency 50/60 Hz

Power Consumption

MFR-1100 70 Watts max.

MFR-2200 130 Watts max. (With both channels on)

Output Power Max. 60 Watts max. Per channel at 22°C ambient

temperature

Output Frequency 450--480 KHz

Power Cord 3-Wire 183cm (18/3) SJT

Dimensions w x d x h

MFR-1100 90mm (3.5”), 297mm (8”), 142 mm (5.6”)

MFR-2200 122mm (4.8”), 200mm (8”), 152.5mm (6”)

Certification / Marking cTUVus, CE

Tip-to-Ground Potential <2mV

Tip-to-Ground Resistance <2 ohms

Idle Temperature Stability ± 1.1°C in still air

Hand-piece Cable Length L=122cm (48”), burn proof, ESD safe

Hand-piece Connector 8-pin circular DIN

Workstand Dimensions w x d x h 100 mm (4”) x 200 mm (8”) x 100 mm (4”) max

MFR-PS1100 MFR-PS2200