Datasheet

12151 Monarch Street, Garden Grove, CA 92841 • [phone] • [phone] fax • www.okinternational.com
Digital, Value-price and Productivity-focused Dispenser/controller
The DX-250/255 Series dispenses low, medium and high-viscosity fluids accurately and consistently. The DX-250/255
Series is immediately usable anywhere in the world with its accompanying tools, accessories and universal power
supply.
The modern-style enclosure has a small footprint and conserves workspace through exterior design that allows
multiple units to be stacked and fastened on top of each other. A highly responsive air pressure and vacuum
management system, coupled with a digital timing circuit, provides consistent and repeatable fluid dispensing and
material waste control. User friendly firmware provides quick and easy setup function.
Part Number Description
DX-250 Dispenser/Controller 0-100 psi (0-6.9 bar)
DX-255 Dispenser 0-15 psi (0-1.03 bar
DX-250 Series
Digital Dispenser/Controller
Key Features
• Universal power supply with snap-on plug for
worldwide use
• User Friendly firmware provides easy setup task
• Digital timing from 0.020-60.000 seconds
• +/- 0.001% Timing repeat tolerances
• Adjustable vacuum-driven “suck back” to control
material “tailing” and waste
• Stable to conserve work space when multiple
DX-250/255 units are used together.
Designed For User Convenience
• User Friendly firmware
• Footprint is 30% smaller than the closest,
similar shaped, competitor product
• Weight is 84% lighter than the closest, similar
shaped, competitor product
• Large, clearly marked air pressure and
vacuum control knobs
• Precise, finely scaled air pressure gauges
• High visibility, 16 x 2 LCD display panel with
back lighting
• Accessories included: Universal power
adapter, Foot Switch, Syringe Stand, 10-cc
Receiver Head, air hose with fittings, hose
holder and sample needles
Specifications
• Cabinet Dimensions: 6”W x 6.5”L x 7.0”H
152mm x 165mm x 178mm
• Weight: 2.6 lb (1.2kg)
• Cycle Rate: 600 cycle/minute
• Timing Range: 0.020-60.000 seconds
• Timing Tolerances: +/- 0.001%
• Input Voltage: 100-240 VAC
• Input Frequency: 50-60 Hz
• Cycle Mode: TIMED, PURGE
• Meets or exceeds: CE, TUV-GS, and NRTL
• Warranty: 1 year
Note: Specifications and technical details subject to change
without notice