Datasheet

Specifications
CV-5200 Series
Connection Validation™ Soldering Station
Cartridge & Heater Series Legend
Cartridge Series
• CVC–ConnectionValidationCartridges,
Connection Validation enabled
• SMC–SurfaceMountCartridges
• Newcartridgeseriestobeaddedsoon
HeaterSeries–representedbythexinthepart
number.
• 5-500seriesheaters
• 6-600seriesheaters
• 7-700seriesheaters
• 8-800seriesheaters
• 9-900seriesheaters
BL Blade KN Knife
BV Bevel MH Mini-Hoof
CH Chisel QD Quad
CN Conical SC
Slotted
Cylindrical
CP Hollow Cup SH Shield
TN Tunnel SL Slot
HF Hoof WV Wave
HK Hook FB Flat Blade
HP Hot Plate VC V-Groove Chisel
HS Heat Stake PC Pin Connector
LG Long Groove SK Socket
Dimensions
Fourdigitnumericalvalue,whichrepresentsthekeydimensionofthe
geometry.
Special Designator
Provides an additional level of identification to the cartridge to better
identify any unique attributes
A Access additionallengthinoneaxis,>10mm
D Deep Taper
H High Mass Similar in design to another tip geometry
with increased thermal mass
J Reach with Taper additionallength>10mmwithachangein
axis,Taper
L Long Life increased tip plating
N Non-Wetting 1 or more surfaces that are non-wetting
P Power reducedlengthinone-axis,<6.5mm
Q Square SquareendfeatureforFlatBlade
geometry
R Reach additionallength>10mmwithachangein
axis
S Standard
T Taper Taper with Step
U Round RoundendfeatureforFlatBlade
geometry
V Concave
W Enlarged Wetting
Area
X
Power & Long Life reducedlengthinone-axis,<6.5mm,
increased tip plating
Geometry
New Cartridge Smart Numbering Scheme
With the introduction of
Connection Validation,
Metcal is migrating to a
new smart numbering
convention that is designed
to assist the operator or
the process engineer in the
selection of the correct
cartridge for the
application.
Note: STTC/SMTC cartridges will not work on CV-5200 series
systems.