Datasheet

www.okinternational.com
8 of 11
Tip Extraction
The new BTX-208 is an electric driven tip extraction unit which can provide fume extraction for up to 8 stations.
The filter unit itself and the connection accessories are designed for easy planning and installation.
Steps:
 Plan facility layout in groups of up to 8 stations
 Select a duct connection kit, based on
o number of stations
o layout of stations: single row or double row of benches
o length of ducting
If needed, supplement the connection kit with individual components, as for example additional length of hose.
 Select the iron adapter kit which includes the vacuum tubing from the iron to the main duct.
The connection kits are provided with 1 piece of flexible hose and with the length as specified above. When
installing, the hose needs to be cut at site into the various section lengths as needed. This assures the most
economical use of the hose.
If needed, the connection kits can be supplemented with individual components as listed in the following table.
Connection Kits
Description
BTX-CK2-25
BTX-CK4-50
BTX-CK4-75
Max number of stations
single-row bench
2
4
4
double-row bench
4
8
8
Qty
Qty
Qty
Flexible hose Ø 35mm (1.375”)
2.5m (8’)
5.0m (16’)
7.5m (25’)
Coupling with two glands 5.6mm
2
4
4
End plug
1
2
2
T-piece connector for 35mm hose
0
1
1
Pipe clip
2
5
5
Roll of vinyl tape
1
1
1
30m (100’) max recommended duct length
1 solder iron per coupling for
single-row of benches and 2
irons for double-rows
Filter Unit:
BTX-208
Duct Connection Kit
Iron Adapter Kit