Datasheet
55
www.metcal.com
HCT-900 Handheld Convection Tool
Nozzle Selection
The HCT-900 is supplied with a standard single jet H-D50 (0.2", 5.0mm)
nozzle. In addition, two rework nozzle kits, predefined for specific
applications, are available, as well as a full selection of nozzles.
NZKT-1 Nozzle Kit for Chip Resistors, SOIC & TSOP Packages. Includes (one each):
• H-D25 • H-SL16 • H-SL28
• H-SOJ40 • H-TS48
NZKT-2 Nozzle Kit for PLCC, QFP & BQFP packages. Includes (one each):
• H-P20 • H-P44 • H-P84
• H-Q1420 • H-Q2626
Technical Specifications
Input Line Voltage 230 V HCT-900-21 / 115V HCT-900-11
Power 320 W
Air Pump Type Diaphragm
Air Flow 6-25 l/min
Control Temperature 100ºC - 500ºC (212ºF - 932ºF)
Dimensions (L x W x H) 210 x 170 x 140 mm (8.7" x 6.7" x 5.5")
Noise Level Less than 46 dBA
Surface Resistivity Unit: 10
5
Ω - 10
6
Ω. Hand-piece & tube: 10
7
Ω - 10
11
Ω
Weight 4.7Kg (10.4 lbs)
Certification / Approvals cTUVus, CE
Model Chip Type A mm (in) B mm (in)
H-P20 PLCC-20 11.9 (0.47") 11.9 (0.46")
H-P28 PLCC-28 14.5 (0.57") 14.5 (0.57")
H-P32 PLCC-32 16.9 (0.67") 14.3 (0.56")
H-P44 PLCC-44 19.5 (0.77") 19.5 (0.77")
H-P52 PLCC-52 21.0 (0.83") 21.0 (0.83")
H-P68 PLCC-68 27.1 (1.07") 27.1 (1.07")
H-P84 PLCC-84 32.4 (1.28") 32.4 (1.28")
H-Q07 QFP-48 8.4 (0.33") 8.4 (0.33")
H-Q10 QFP-44 13.4 (0.53") 13.4 (0.53")
H-Q14 QFP-52,80 17.3 (0.68") 17.3 (0.68")
H-Q1420 QFP-64,80,100 23.4 (0.92") 18.1 (0.71")
H-Q28 QFP-120,128,144,160 31.2 (1.23") 31.2 (1.23")
H-BQ23 BQFP-100 22.4 (0.88") 22.4 (0.88")
H-Q3232 QFP-240 34.5 (1.36") 34.5 (1.36")
H-BQ38 BQFP-196 37.7 (1.48") 37.7 (1.48")
H-Q2626 QFP-208 29.8 (1.17") 29.8 (1.17")
H-S16 SOIC 14,16 6.8 (0.27") 10.2 (0.4")
H-SL16 SOL 14,16 10.6 (0.41") 10.8 (0.43")
H-SL20 SOL 20,20J 10.6 (0.41") 13.3 (0.52")
H-SL24 SOL 24,24J 10.6 (0.41") 15.9 (0.63")
H-SL28 SOL 28 10.6 (0.41") 18.4 (0.72")
H-SL44 SOL 44 16.0 (0.41") 27.9 (1.1")
H-SOJ32 SOJ 32 13.5 (0.53") 20.6 (0.81")
H-SOJ40 SOJ 40 13.5 (0.53") 25.4 (1.0")
H-TS24 TSOP 20-24 17.0 (0.67") 7.1 (0.28")
H-TS32 TSOP 28-32 21.0 (0.83") 9.1 (0.36")
H-TS40 TSOP 40 21.0 (0.83") 10.8 (0.43")
H-TS48 TSOP 48 21.0 (0.83") 13.3 (0.52")
H-TSW24 TSOP 20-24 10.2 (0.4") 18.4 (0.72")
H-TSW44 TSOP 24-28/40-44 12.7 (0.5") 19.8 (1.78")
Model ø A
H-D25 2.5 mm (0.1")
H-D50 5.0 mm (0.2")
H-D120 12.0 mm (0.47")