Soldering/Desoldering Convection Rework Fume Extraction Fluid Dispensing www.beasuperproducer.
TAP into OK International and become a SuperProducer Only at OK International will you find conduction soldering & rework, convection rework, fume extraction and fluid dispensing products that allow you to TAP into three advantages over competitive systems. Training Advantage Our products require minimal training time, and are easy and comfortable to use. Application Advantage We design our products to be multi-functional and flexible to meet every application need.
Content Hand Soldering & Rework SmartHeat Technology Product Selection PS-900 Production Soldering System MFR-1100 and MFR-2200 Soldering & Rework Systems MFR Series Desoldering Systems Accessories Tips and Cartridges ® 3 - 18 3 4 5-6 7-9 10 11 12 - 18 Convection Rework 19 - 28 Fume Extraction 29 - 36 Fluid Dispensing 37 - 44 Metcal Range 45 - 46 Product Selection MRS-1000 Modular Rework System HCT-1000 Programmable Hand Held Convection Tool PCT-1000 Programmable Pre-heater ATH-1000 Adjustable T
SmartHeat Technology ® OK International is the only provider of SmartHeat® patented Soldering Technology. SmartHeat® senses the exact thermal requirement for each solder joint and responds by delivering the precise amount of thermal energy required to create a reliable connection. The result is a high degree of control without resorting to higher tip idle temperatures required by conventional heater process technologies. Consequently, the risk of component and board damage is minimized.
Hand Soldering & Rework Product Selection p t um tpu ir P d A Ou ut ce l ce e s n a i e tan i r utp -P ks ou -P e O r e rn d e xte t d c o n n t d n E ie a a e s , an es ,I tpu pW ult ch ge ng dg d -P ng eH rH im Ou lee wit e ri rtri an trid ze e ri dg S i s a d r S S e l e d r l l H l p t a l C i e r g a a to so so C iC iT Tip Tw Ca Du Sin Au Du De De SS OK OK Air al SELECT A COMPLETE SYSTEM PS-900 MFR-1110 MFR-1120 MFR-1140 MFR-1160 MFR-1161 MFR-2210 MFR-2220 MFR-2240 MFR-2211 MFR-2222 MFR-2241
PS-900 Production Soldering System The PS-900 Soldering System, powered by SmartHeat® Technology, is part of a new generation of cost effective soldering systems from OK International. The PS-900 provides power and exceptional thermal control in a small benchtop footprint.
PS-900 Production Soldering System Part No.
MFR-1100 Series Single Output Soldering & Rework System The MFR-1100 Single Output Series is designed to minimize training investment, maximize application solutions and increase productivity. This Series is highly versatile in that it can be used with either a soldering tip, cartridge or tweezers and offers a choice of four hand-pieces.
MFR-2200 Series Dual Simultaneous Output Soldering & Rework System The MFR-2200 Series features dual output capability allowing users to select operation of one hand-piece or two hand-pieces simultaneously. Like the MFR-1100 Series, the MFR-2200 offers the same choice of multiple hand-pieces. Flexibility can be increased by locking both systems together.
MFR-1100 & MFR-2200 Series Soldering & Rework Systems Key Features & Benefits SmartHeat® Technology provides exceptional power for high thermal demand applications Single or Dual simultaneous outputs allow for single or dual hand-piece use Four hand-pieces available for increased application solutions for soldering and rework on one system Other Accessories Available: MFR-CA2 Coil Assembly for Tip Hand-piece (MFR-H2-ST) WS1G Auto-sleep Workstand, Green AC-CP2 Cartridge / Tip Removal Pad MFR-P
MFR Series Desoldering & Rework Systems Key Features & Benefits MFR-DSX / MFR-DSI Versatile and ergonomic gun hand-piece that easily switches to a pencil handpiece Dual switched outputs (soldering or desoldering) SmartHeat® makes through-hole desoldering easy and safe The solder collection chamber and filter system is quick and easy to change, and provides low cost maintenance Two Desoldering Systems available: MFR-DSX requires shop air. The MFR-DSI features an internal vacuum pump.
Accessories and Spare Parts for PS and MFR Platforms 1 2 3 4 5 6 8 7 12 11 13 11 14 Workstands WS1 WS2-NS MFR-WSPT MFR-WSSR MFR-WSDS WS1CB WS2CB 9 7 8 Universal Auto Sleep Workstand Solder Workstand (PS-900) Non Sleeper Precision Tweezer Workstand Non Sleeper Stand Soldering Workstand Non Sleeper Desoldering Workstand (MFR-DSX,-DSI,-SDX,-SDI) Solder Rework Cradle Replacement for WS1 Workstand Solder Rework Cradle Replacement for WS2 Workstand Auto-Sleep Workstand WS1 & WS1G: how do they work?
Tips and Cartridges Selection RANGE SxV Tip CxV PHT SxP RxP SSC TxP Ca idg rtr e ld So in er g Re w k or a Bl de Tw ee r ze De e old s ri n g -H PS H C3 an p d- PS e iec 1 HC Ha nd p R MF e iec 2 -H T -S n Ha RMF p d- e iec H6 C SS Ha nd H RMF pie 1- ce SC n Ha RMF p d- H4 e iec W -T Ha nd H RMF pie SR ce H d an -p iec e D S ce -H -p i e R d MF H a n Maximum Tip Tempe
SxV and CxV Soldering Tips The SxV and CxV tips are for use with the soldering tip hand-pieces of the PS and MFR Platforms and are recommended for heavy duty applications. Full range available at www.okinternational.com. 0.43" 11.0mm 0.04" 1.0mm 0.43" 11.0mm 0.08" 2.0mm 0.43" 11.0mm 0.1" 2.5mm 0.2" 5.0mm 0.06" 1.5mm 0.48" 12.2mm 0.02" 0.5mm 0.02" 0.5mm 0.016" 0.4mm 0.4" 10.0mm 0.34" 8.5mm 0.51" 13.0mm 0.53" 13.6mm SFV-CH10 Chisel Solder Tip 30° 1.0mm (.04") SFV-CH20 Chisel Solder Tip 2.
SxV Soldering Tips - Easy Access The SxV Easy Access tips are for use with the soldering tip hand-pieces of the PS and MFR Platforms and are recommended for longer reach touch up applications. Full range available at www.okinternational.com. .724" 18.4mm .01" 0.3mm .016" 0.4mm 19.6mm .77" .53" 13.7mm .02" 0.5mm .54" 13.7mm .04" 1.0mm .06" 1.5mm .528" 13.4mm .07" .528" 13.4mm 1.8mm SFV-CNL03A Conical Long Solder Tip 0.3mm (.01") SFV-CNB04A Conical Bent Solder Tip 0.4mm (.
SxP Soldering Cartridges The SxP cartridges are for use with the soldering cartridge hand-piece of the MFR Single and Dual Platform. They provide a wide range of options addressing specialized soldering and rework applications. Full range available at www.okinternational.com. 0.016" 0.4mm 0.6" 15.21mm 0.016" 0.4mm 0.59" 14.9mm 0.016" 0.4mm 0.02" 0.5mm .579" 14.7mm 0.6" 15.21mm 0.02" 0.5mm 0.56" 14.22mm 0.04" 1.0mm 0.36" 9.2mm 0.04" 1mm 0.06" 1.5mm 0.06" 1.5mm 0.08" 2.0mm 15 0.34" 8.
RxP Rework Cartridges The RxP cartridges are for use with the soldering cartridge hand-piece of the MFR Single and Dual Platform. Full range available at www.okinternational.com. Blade cartridges are designed to allow effective and quick cleaning of PCB pads. Tunnel cartridges are used for the removal of multi-lead, two-sided components such as SOICs, SOJs and TSOPs. .127" 3.22mm .17" 4.32mm .204" 5.18mm .09" 2.29mm .17" 4.32mm .204" 5.18mm .09" 2.29mm .44" 11.18mm .270" 6.
TxP Tweezer Cartridges .03" 0.76mm .55" 14mm .04" 1.0mm .03" 0.76mm .079" 2.0mm .55" 14mm TFP-BLP1 Tweezer Cartridge Blade Pair 1.0mm (.04") TFP-BLP2 Tweezer Cartridge Blade Pair 2.0mm (.08") For use on MFR Single and Dual Platforms More cartridges available at www.okinternational.com .75" 19.1mm .015" .38mm TFP-CNP1 Tweezer Cartridge Conical Pair 0.4mm (.015") Heavy Duty Tweezer Pair TFP-BLH40 - A= 6.35mm (.25") A TFP-BLH50 - A= 16mm (.62") 0.028" 0.57mm 0.055" 1.4mm TFP-BLH60 - A= 20.
SSC Soldering Cartridges .39" 9.9mm .10" 2.5mm .40" 9.9mm .07" 1.78mm .06" .40" 10mm 1.5mm .04" .43" 11mm 1.0mm SSC-736A Chisel 30° 2.5mm (.10") SSC-737A Chisel 30° 1.78mm (.07") For use on MFR Single Platform More cartridges available at www.okinternational.com .45" 11.4mm .02" 0.51mm .02" 0.51mm .45" 11.4mm SSC-738A Chisel 30° 1.50mm (.06") 0.5mm SSC-725A Chisel 30° 1.0mm (.04") .04" .64" 16.25mm .02" .18" 45º 4.5mm .24" 6.1mm .60" 15.2mm 1.0mm SSC-722A Conical Sharp 0.51mm (.
Convection Rework Product Selection SYSTEMS MRS-1000 HCT-1000 PCT-1000 0V 11 PCT-100-11 PCT-101-11 PCT-102-11 PCT-103-11 HCT-900-11 PCT-100-21 PCT-101-21 PCT-102-21 PCT-103-21 HCT-900-21 2 V 40 a An log gi Di tal e Pr -h e r ate n Ha dh el oo dt l o Pr gr am b ma le Ma nu al te Ex rn a on pti h rd old er p a ag ku bo tor d S pic
MRS-1000 Modular Rework System The MRS-1000 Modular Rework System is an integrated convection rework system for the removal and placement of BGA/CSP and SMT components. 4 3 The MRS-1000 is comprised of a hand held convection tool, preheater, and adjustable tool holder with board holder to create a manually assisted rework system. A series of nozzles, targeting a variety of applications, and light magnifier round out the product offering for this system. The 4 components of the MRS-1000 Systems are: 1.
HCT-1000 Programmable Hand Held Convection Tool The HCT-1000 is a fully Programmable Hand Held Convection Tool offering fast and easy removal and placement of SMT components. The HCT-1000 stands out as a versatile convection rework tool. It can be used on its own or as part of the MRS-1000 Modular Rework System for more complex applications. The system comes equipped with a 5mm nozzle and nozzle adapter. In addition, a wide range of nozzles is available, see page 22.
HCT-1000 Programmable Hand Held Convection Tool HN Series Nozzles A series of 14 Nozzles are available for use with the MRS-1000 / HCT-1000. The nozzles fit applications reworking components of all sizes from (including, but not limited to) BGAs, QFPs, LGAs, PLCC and SOIC. A custom nozzle program is also available. Nozzle Measurement and Selection The nozzle part number (the digits after the “B”) represents the size of the component.
PCT-1000 Programmable Pre-heater The PCT-1000 is a fully Programmable Pre-heater offering more heat, lower temperatures for faster and higher quality results. The PCT-1000 provides users exceptional ability to increase heat capacity with highly controlled thermal output. The PCT-1000 can be used as a stand alone unit or as part of the MRS-1000 Modular Rework System.
ATH-1000 Adjustable Tool Holder Key Features & Benefits Adjustable Tool Holder designed to work as stand-alone operation or integrated as part of the MRS-1000 Consists of a board holder, locking hand-piece retainer, Z axis stop and mounting configurations Sturdy and easy to attach to the PCT-1000 when incorporated into the MRS System.
PCT-100 Focused Convection Pre-heater The PCT-100 is a focused convection pre-heater that is designed to provide extra heat capacity for demanding applications. Unlike conventional pre-heaters, the PCT-100 Focused Convection Pre-heater directly targets the underside PCB providing a substantial thermal boost for lead- free processes.
Board Holders for PCT-1000 & PCT-100 Pre-heaters BH-100 Board Holder. Recommended for use with the PCT-100 Pre-heater BH-1000 Post-Rail Board Holder. Includes: 4 posts, 2 rails with sliding clips, 4 support pins and flat-head support BH-PK1000 Board Holder Pin Kit.
HCT-900 Hand Held Convection Tool The HCT-900 Hand Held Convection Tool offers a low cost, versatile rework solution for a wide variety of production and rework application challenges: Rework a wide range of simple and complex SMT components Rework pin in-hole devices such as sockets and connectors Remove solder shorts and splashes by using it with solder braid and flux Plastic applications such as applying shrink wrap to components Key Features & Benefits Versatile Hot Air Tool for soldering
HCT-900 Hand Held Convection Tool Nozzle Selection The HCT-900 is supplied with a standard single jet H-D50 (0.2", 5.0mm) nozzle. In addition, two rework nozzle kits, predefined for specific applications, are available, as well as a full selection of nozzles. NZKT-1 NZKT-2 Nozzle Kit for Chip Resistors, SOIC & TSOP Packages. Includes (one each): • H-D25 • H-SL16 • H-SL28 • H-SOJ40 • H-TS48 Nozzle Kit for PLCC, QFP & BQFP packages.
Fume Extraction Product Selection SYSTEMS BVX-101 tor n* top t ica tio on ch d i s c n ine t n n r it tio rm tr tra ab nc Be kI t e n c x i x u A C c s / s a n E F t o U m tra gU eE le xtr lex Bl le lU m us ble Ar le Ex nif ltip alo ita nu ha X sE rtic rta lum ter ng u l n g p i x e m i a i a o V o i l A S E M F T V P O P B D P G ti ac BVX-103 BVX-201-KIT BVX-201-KIT1 BVX-201 BVX-203 BTX-208 MFX-2200C-A MFX-2200C-D MFX-2206C-A MFX-2206C-D MFX-2200G-A MFX-2200G-D MFX-2206G-A MFX-2206G-D
BVX-100 Benchtop Single User Arm/Plenum System Key Features & Benefits Portable, single user fume extraction system Low noise unit No external ducting or compressor needed Unit easily fits on any bench-top or under-bench Innovative adaptor transforms the plenum into an arm Powerful 85m3/hr-airflow rate Immediate extraction of fumes, particles and vapors Two filtration configurations: heavy soldering and light dust or light duty organic solvent and adhesive applications Bi-coloured LED lig
BVX-200 Two Stations Portable Filter Unit Key Features & Benefits Two station design for dynamic fume extraction New brushless motor, quiet operation Complete portability, placed under or next to the bench-top Fitted with 2x 50mm (2") ∅ arms or 1x 63mm (2.5") ∅ arm Main filter has a HEPA efficiency of 99.97% at 0.
MFX-2200C Particle Fume Extraction System The multi-user MFX-2200C Fume Extraction System provides the ultimate performance in a compact size that easily fits under most workbenches. It is ideal for removing solder fumes and filtering laser fumes. Key Features & Benefits Excellent air flow performance Large, pleated pre-filter HEPA filter rating of 99.97% at 0.
MFX-2200G Gas Fume Filtration System The MFX-2200G Fume Extraction System has been specifically designed for the removal of gases and vapors from a range of heavy duty bench-top applications, including solvent cleaning, gluing/bonding and conformal coatings.
Omniflex & BVX Arms The Omniflex Arms (Ø63mm) are designed for higher airflow rates and effective fume capture from greater distances. A unique ball/socket design provides an unmatched flexibility in manoeuvring and positioning. The arms can be adjusted in working length or radius, simply by adding or removing Omniflex components. ESD conformance is ensured through the use of fully conductive material. Key Features & Benefits 140m3/h (85cfm) air flow rating (varies with nozzle) 63mm (2.
BTX-208 Portable Tip Extraction Unit Key Features & Benefits High performance extraction directly from the tip of any iron Easy extraction network configuration for up to 8 benches Complete portability. Designed for under-bench installation Main filter has a HEPA efficiency of 99.97% at 0.
7 8 6 6 Iron Adapter Kits AC-FX1 Universal tip extraction iron adapter clip includes: BTX-UC01 6 2 x universal clips 18574S-5 7 1 x silicon hose DS03-910-5 1 x cleaning brush 20233S-5 8 1 x stainless tube 20237S-5 4 x S clips 18576S-5 1 x connecting gland Other tip extraction iron adapter kits available: www.okinternational.com/product_fume/btx_208 Technical Specifications Max.
Product Selection kH m oc ula uu er L c h n s s r a en Va 15 10 ru s ue c lC re isp to to um sti r& xB Tip su ee ble xL u i D l t i a e 0 l 0 s l l a c g a e S r r e P c re H He Va d Tim se se sin ss mm le alv mi lP re al en ra en en ble ble log no tV xib nle ita g p i u u a pe o o git e g sp sp s o i l a i o i i F D Ta D D D D Di An Ec Fo Do Pr St i s 0p SYSTEMS DX-250 DX-350 DX-255 DX-355 924-DFV i ps 924-DFV-VAC TE Series BT Series TS-P Series TT Series Tutorial Time-P
DX-250 Series Digital Dispenser The DX-250 Series is a high performance Digital Dispenser. Complete with a range of accessories, the micro-air dispensing system unites affordability with high accuracy and repeatability for exceptional results. These user friendly fluid dispensing systems include a digital timer with a rotary control time knob for easy setup and a vacuum suck-back control for all viscosities of fluids.
DX-350 Series Digital Dispenser The DX-350 Series is a microprocessor-driven and fully digital Dispenser. Intuitive to use, the DX-350 dispenses low, medium and high-viscosity fluids accurately and consistently. The firmware provides the option of programming up to 10 varied, sequenced or individual shots. The DX-350 includes an adjustable vacuum-driven “suck-back” to control material “tailing” and waste.
924-DFV Series Foot Valve Dispenser The 924-DFV Series Foot Valve Dispenser offers increased production combined with dispenser economy. Floor mounted, they have a built in pressure regulator, pressure gauge and a unique fast-dump, three-way air valve. Output rate and shot size are operator controlled. The 924-DFV is the ideal basic dispensing unit for most general applications of adhesives, sealants, coatings and compounds.
Dispensing Tips TE Tips Series Stainless-steel cannula with a double Helix polypropylene hub Burr-free and electro-polished cannula for unobstructed and consistent material flow Silicone and chloride free Sold in packs of 50 Gauge 14 15 18 20 21 22 23 25 27 30 32 1/4" (6.35mm) 918025-TE 920025-TE 921025-TE 922025-TE 923025-TE 925025-TE 927025-TE 930025-TE 932025-TE 1/2" (12.7mm) 914050-TE 915050-TE 918050-TE 920050-TE 921050-TE 922050-TE 923050-TE 925050-TE 927050-TE 930050-TE 1" (25.
Dispensing Tips BT Series Double Helix Brush Tips for "spread" applications such as glues and other materials. Soft brush is made of Red Sable Stiff brush is made of Nylon Available in packs of 12.
Dispensing Consumables End Caps Designed to seal large end of the syringe barrel Ensure no contaminants come in contact with material during storage Made from polyethylene Available in packs of 50 Size 3cc 5cc 10cc 30/55cc End Cap 903-EC 905-EC 910-EC 93055-EC Air Powered Pistons Wiper Pistons provide a seal for low to medium viscosity fluids Straight Wall Pistons for reduced stringing with medium to high viscosity fluids Both styles of pistons are made from polyethylene Sold in packs of
Dispensing Accessories Receiver Head Assembly ◗ Connecting link between time/pressure controllers and Syringe assemblies ◗ Provides a safe connection for accident proof dispensing ◗ Available with 3 or 6 feet of tubing ◗ Includes: receiver head with O-ring, tubing and male quick connector ◗ Receiver heads are made of Delrin® ◗ Sold individually Size 3cc 5cc 10cc 30/55cc 3' Hose 903-3RHB 905-3RHB 910-3RHB 93055-3RHB 6' Hose 903-6RHB 905-6RHB 910-6RHB 93055-6RHB Manual Syringe Gun ◗ Lightweight barrel appl
Metcal MX-5000 Soldering, Desoldering and Rework Systems Discover our Metcal range at www.metcal.com or ask for our Metcal catalogue. The new MX-5000 Soldering, Desoldering and Rework System is the next generation of the trusted Metcal Soldering Systems that enable increased productivity and process control for a wide range of applications. More power: With nearly double the power of its predecessor, the MX-5000 time-to-recovery increases production rates and throughput.
Metcal APR-5000 Precision Advanced Package Rework Systems Discover our APR range at www.okinternational.com and soon on www.metcal.com and in our new Metcal catalogue. The APR-5000 Series incorporate state-of-the-art vision, and closedloop time, temperature and airflow control. Economical and easy-to-use, the APR-5000 Series delivers best-inclass BGA/CSP functionality with performance at an affordable price.
BRO-OKI-09 www.okinternational.