User Manual

OK International Inc. • 10800 Valley View Street • Cypress, CA 90630 • USA
Phone: [phone] • Fax: [phone] • www.metcal.com
SETUP INSTRUCTIONS: (Refer to Figure 2)
1. Press the lock button (#2) and insert the push rod (#3) to the gun body; make sure the
push rod is pushed all the way back
2. Insert the syringe barrel assembly (#1) into the gun assembly and turn clockwise to lock
3. Install the dispense tip to the syringe barrel outlet
4. Squeeze the trigger (#4) to start dispensing
5. Press the lock button and pull the push rod back to remove the syringe barrel assembly
PARTS LISTS:
Gun Assembly
Item #
Replacement Component
Description
910-MSG
1
71000ROD
Push Rod, 10 cc
2
910-WW
Piston, 10 cc
3
910-N
Barrel, 10 cc
4
900-ORTC
Tip Cap
930-MSG
1
73000ROD
Push Rod, 30 cc
2
930-WW
Piston, 30 cc
3
930-N
Barrel, 30 cc
4
900-ORTC
Tip Cap
955-MSG
1
75500ROD-C
Push Rod, 55 cc
2
930-WW
Piston, 30 cc
3
955-N
Barrel, 30 cc
4
900-ORTC
Tip Cap
Figure 2
7000-2230_F
23
4
1
Figure 3