Datasheet

Applications
Accessories
Needles Colour Coding
Benchtop Fluid Dispensing
Product Guide
Dam and Fill
Dispense Dam encapsulant to make flow control
barrier around area of bare chip. Dispense liquid
encapsulant to cover the bare chip.
Glob Top (Chip encapsulation)
Dispense liquid encapsulant to cover bare semicon-
ductor devices.
SMT
Dispense surface mount adhesive.
Soldering
Dispense dots or beads of solder paste on electronic
/ electrical parts such as: pinned connector to PCD,
EMI shielding, relays, diodes, sensors, DC motor
assemblies, coil winding, flex circuit...
Underfill
Flip chip underfill for multi-chip modules.
Syringe Holder
Use for 700 System syringes
SH-300 Syringe Holder
Vacuum Pencil
Use for pick and place function.
Stand-alone vacuum pick-ups
requires shop air. Optional Mixed
Kit for Vacuum cups also
available.
TS-8120 Vacuum Pencil
Finger Switch Assembly
Use the Finger Switch with OKi’s
dispensers and syringes in place
of a foot pedal. Provides control
at your finger tip.
DX9010 Finger Switch Assembly
Manual Syringe Gun
Lightweight barrel applicator gun
provides excellent control for
medium/high viscosity products.
Easy to use. No dripping or mess.
905-MSG 5cc 910-MSG 10cc
930-MSG 30cc 955-MSG 55cc
Needle Dispensing Kit
This kit contains a selection of
OKi’s most popular TE, TE Bent
and TT needles.
900-NK
Needle Dispensing Kit
Foot Valve Dispensers
Floor mounted, they have a built
in pressure regulator, pressure
gauge and a unique fast dump,
three-way air valve. Output rate
and shot size are operator
controlled.
924-DFV
Foot valve dispenser
924-DFV-VAC Foot valve
dispenser with vacuum
BRO-FDPG-07
www.okinternational.com
For TE Series and TE Bent Needles