Operation Manual

Revision 2.1
December 2, 2012 Page 6 of 13
3 PAIRING AND CONNECTING
While we’re sure you love your MetaWatch as a snazzy looking watch, we both know you didn’t get it just to tell
time. Let’s pair up with your phone! Also, your watch will remember your phone and won’t go off pairing with some
other phone.
3.1 iOS Users
1. First things first, you need the MetaWatch Manger application from iTunes App Store. Install it, open it, and
move to Step 2.
2. Tap Connect in the MetaWatch Manager app. Within a few moments, the app will discover your MetaWatch
and connect to it. Your MetaWatch will populate with the default widgets to get you started, but we’re not
done yet!
3. Head to your iOS Bluetooth Settings in the Settings menu. You’ll see MetaWatch SW12 in the Discoverable
Devices; tap it.
4. Enter 0000 when asked for the pairing code. One more thing to do!
5. Tap the Settings arrow next to MetaWatch SW12 in this screen, and flip the Show Notifications toggle to
ON.
6. All done! Go and show it off!
3.2 Android Users
1. First things first, you need the MetaWatch Manager application from the Play Store. Install it and move to
Step 2.
2. Turn your Bluetooth antenna on. Your phone does not have to be discoverable to pair.
3. Run a scan for devices. When the scan is complete, find MetaWatch SW12 in the list of discoverable devices
and tap it.
4. You may be asked for a Bluetooth key or passcode. If prompted, enter 0000.
5. Open the MetaWatch Manager application and tap the Connect button. The app will load your watch with
the default widgets.
6. All done! Go and show it off!