Operation Manual

Revision 2.1
December 2, 2012 Page 4 of 13
2 GETTING STARTED
2.1 Charging Your Watch
Out of the box, your MetaWatch requires a full charge before use. The first charge takes around four (4) hours to
complete, but the wait is worth it. To charge the watch, follow these steps.
1. Grab the included charging clip—don’t plug it in yet, though. Squeeze it open so you can see the four (4)
silver pins inside the clip.
2. Locate the indented area on the back of the face of your MetaWatch that has four (4) silver contacts.
3. Insert your MetaWatch into the clip so the four (4) clip pins align with the four (4) contacts on the watch and
gently release the clip.
4. Connect the microUSB cable to the clip.
5. Connect the USB cable to your computer or wall outlet to USB adapter.
The clip’s LED will light up to indicate the clip has power. The face of the MetaWatch will display the logo to indicate
it is receiving power. Once your MetaWatch has sufficient power (usually in a few seconds), it begins booting up and
can operate while charging. Remember, keep it on the charger until it’s full the first time.
2.2 Watch Button Map
Your MetaWatch has six (6) buttons on it, three (3) per side. The buttons will vary in function depending on which
menu your MetaWatch is currently showing. For easy orientation, we’ve created maps of what each button does for
most every screen you’ll see on your MetaWatch. Here’s an example.
Quick Tip: The top left button (F) stays the same—it always turns on the light so you can see your watch in the dark!