User manual

TD990200-0ME

routing has been pre-installed onto the Communication Processor at

the factory and immediately begins execution upon power-up. To

configure the program, a laptop computer running a terminal

emulation program, like HyperTerminal, is attached to one of the

COM ports using a null-modem cable. Once configured, the

program runs continually.

Features

• Compact solution for interconnecting ARCNET and Ethernet

networks

• Embedded router/gateway eliminates the need for a

desktop PC

• Flash disk replaces unreliable floppy or hard disk

• Preloaded application software simplifies installation

• Console communication redirected to COM port eliminating

need for keyboard or monitor

• Preloaded DOS and TCP/IP stack

• Automatic booting for stand-alone operation

• Can be retrofitted into an existing MOD HUB chassis

Specifications

Environmental

Operating Temperature:

0°C to 60°

Storage Temperature:

-40°C to +85°C

Mechanical

Occupies two slots in any

MOD HUB series of Modular

Active Hubs

Figure 1

−

Communication Processor

installed in MOD HUB