User`s guide

Operating the DX LCD Display 4-39
3. Use the and keys to move the highlight bar to the parameter
you want to change.
4. Press the
key to begin the edit sequence for the selected
parameter. The first part of the parameter begins to flash to
indicate that it can be changed. For example, the number to the
left of the decimal point begins to flash.
5. Use the
or key to increase or decrease the selected value.
6. Press again to confirm the new value. The next part of the
parameter begins to flash to indicate that it can be changed
(e.g., the number to the right of the decimal point).
7. Repeat Steps 5 and 6 for each part of the parameter until you have
edited all parts of the parameter. The last press of the
key
completes the edit sequence for the parameter and the new values
are sent to the DX controller.
Note: Press the
esc
key at any time to abort the edit sequence.
8. Repeat Steps 3 to 7 for the next parameter you want to change, or
press the
esc
key to return to the Main menu.
Viewing Trend Data
To view Trend data:
1. Select the Trend Data option in the Main menu. The main Trend
Data screen appears, as shown in Figure 4-26.
dxtk_35
GROUND FLOOR 11:40
ALARM:
TREND DATA
Tota l: 00
More...
TREND 1 OUTDOOR AIR TEMP
TREND 2 Basement Room TP
TREND 3 Swimming Pool TP
TREND 4 Lobby Lights
TREND 5 Green Room Temp
TREND 6 Floor 1 Lobby TP
TREND 7 OP Theater Humid
TREND 8 TREND DEFINITION MISMATCH
TREND 9 Children's Ward
TREND 10 Chief's Lights
TREND 11 Chief's Cabin TP
TREND 12 Chief's Cabin HU
Figure 4-26: Main Trend Data Screen