User`s guide

Operating the DX LCD Display 4-35
Note: Press the
esc
key at any time to abort the edit sequence. Also,
numbers are used to indicate weekdays in the Days
parameter. The numbers 1 to 7 are Monday through Sunday,
and 8 is any day defined as a holiday in the DX controller
(see the Defining Holidays section).
8. Repeat Steps 3 to 7 for the next parameter you want to change, or
press the
esc
key to return to the Main menu.
Defining Holidays
To define holidays:
1. Select the Holidays option in the Main menu. The first of
three Holidays screens appears, as shown in Figure 4-23.
FLOOR 8 AHU 11:40
dxtk_32
ALARM:
HOLIDAYS 1/3
Tota l: 00
01 Start: End: Jan 08 Jan 20
02
03
04
05
06
07
08
09
10
Jun 15 Jun 29
Dec 24 Dec 31
--- 00 --- 00
--- 00 --- 00
--- 00 --- 00
--- 00 --- 00
--- 00 --- 00
--- 00 --- 00
--- 00 --- 00
Figure 4-23: Holidays Screen
2. Use the
and keys to page through the three Holidays
screens.
3. Use the and keys to move the highlight bar to the holiday
period you want to define or change.
4. Press the key to begin the edit sequence for the selected
holiday period. The first value of the period begins to flash to
indicate that it can be changed. For example, the Start month begins
to flash.
5. Use the
or key to increase or decrease the selected value.