User`s guide

4-6 Display Terminals
Home Page
The DX LCD Display shows a graphical Home Page as the default
screen when it is moved to a different controller. Each of the
eight display configurations can have a different Home Page. The
Home Pages are customizable, and can contain live point data from the
DX controller. The default Home Page is shown in Figure 4-4. For
more information on defining custom Home Pages, see GX-9100
Software Configuration Tool Technical Bulletin (LIT-6364060).
11:40
defaulta
Figure 4-4: Default Home Page
Password
The DX LCD Display implements a password system with
three possible security clearances:
1. No Clearance (i.e., invalid or no password) – Allows you to
monitor the equipment (i.e., view all screens) but does not allow
you to make any changes, such as issuing commands, changing
Time Schedules, changing Optimal Start/Stop parameters, etc.
2. Level 2 – Allows you to monitor the equipment and command
points on the Point Data screens but does not allow you to make
changes on any of the other screens, such as changing Time
Schedules, changing Optimal Start/Stop parameters, etc.
3. Level 1 – Allows you full access to change all values that can be
changed on all of the screens.
The passwords are 4-digit numbers, where each digit is in the range
from 0 to 9, and they are defined in the display configuration.
Note: The default passwords programmed into the DX LCD
Display at the factory are 1111 for Level 1, and 2222 for
Level 2.