User`s guide

Operating the DX LCD Display 4-3
Display Screen
Certain areas of the display screen always show the same type of
information during normal operation (i.e., once the DX LCD Display
has selected a display configuration). These areas of the screen are
indicated in Figure 4-1 and described in Table 4-1.
Table 4-1: Display Screen Components
Area Description
Name of Display
Configuration
Lists the name of the current configuration. You define the
name when you create the display configuration in the
GX-9100 software configuration tool.
Time
Shows the current time in the connected DX controller in
either 12 or 24 hour format.
More
Indicates if there are more pages of data associated with the
current function. Use the page up or page down key to
display the next or previous page.
ALARM: Most
Recent Alarm
Lists the active alarm that occurred most recently and its
status.
Total: # Alarms
Lists the number of points currently in an alarm state.