User`s guide

Installing the DX LCD Display 3-19
Cabling a Portable Device
Figure 3-16 shows the connections between the DX LCD Display and
a DX controller.
dtportca
9/12 VDC Power Supply
(AC Adapter)
RS-232 Serial Port
Connector
DX-9100/9120 Controller
esc
!
DX LCD Display Unit
Serial Cable
Figure 3-16: Connections to the DX LCD Display
To establish a connection to a DX controller:
1. Lift the flap covering the connectors on the back of the DX LCD
Display.
2. Plug the telephone-type connector of a serial communications
cable into the phone jack labeled RS232 INPUT on the DX LCD
Display.
3. Plug the other end of the serial communications cable into the
adapter marked DX/PC.
4. Plug the DX/PC adapter into the RS-232 serial port on the front of
the DX Controller.
5. Plug the small connector of the power supply adapter
(order separately) into the jack labeled 9/12 VDC on the DX LCD
Display.
6. Plug the power supply adapter into a standard AC wall socket.