User`s guide

Installing the DX LCD Display 3-11
1
16 mm Maximum
(0.63 in. Maximum)
(6.85 in.)
174 mm
(5.67 in.)
144 mm
Panelmt
Figure 3-7: Panel Mounting Dimensions
Note: If the panel thickness is greater than 5 mm (0.19 in), remove
the flap on the back of the display covering the erminals
(see Figure 3-10) prior to mounting the display.
2. Insert the DX LCD Display into the cutout, as indicated by  in
Figure 3-7.
3. From the rear of the panel, insert the locking tabs supplied with
the panel mounting kit into the corresponding slots in the sides
and back of the DX LCD Display, as indicated by  in
Figure 3-8.