User`s guide

3-10 Display Terminals
11. Attach the unit to the UPM. See Figure 3-5.
12. Apply power.
Mounting the DX LCD Display in a Panel
The panel mounting kit, supplied as standard equipment with the
DX LCD Display, is required to mount the display in a panel or
cabinet door. To mount the DX LCD Display in a panel or cabinet
door:
1. Make an appropriate cutout in the panel or cabinet door using the
dimensions shown in Figure 3-7 (note the maximum panel
thickness shown in the figure).
WARNING: Cutting a hole in a panel may compromise the
Underwriters Laboratories (UL) rating for the
panel.