User`s guide

Installing the DX LCD Display 3-7
Detailed Procedures
Mounting the DX LCD Display on a Wall
Note: A separately available wall mounting kit is required to mount
the DX LCD Display on a wall (see Ordering Codes in
Appendix A).
To mount the DX LCD Display on a wall:
1. Drill appropriate holes for the wall mounting bracket using the
dimensions shown in Figure 3-4.
76 mm
(3.0 in.)
(0.79 in.)
6 x 30 mm
(0.24 x 1.18 in.)
dxtk_6
20 mm
Figure 3-4: Wall Mounting Bracket
2. Attach the wall mounting bracket to the wall using the screws
provided in the wall mounting kit (Figure 3-4).
3. Connect the serial cable and power supply to the display. Refer to
Cabling a Permanently Mounted Device in this chapter.