User manual

Metapace T-3
Rev. 1.00
- 71 -
<Function 50> GS ( L pL pH m fn (fn=2, 50)
Code :
ASCII
GS ( L pL pH m fn
Hex
1D 28 4C pL pH m fn
Decimal
29 40 76 pL pH m fn
Range:
(pL + pH x 256) = 1 (pL=2, pH=0)
m=48
fn=2, 50
Default:
None
Description :
This command prints the graphics data defined by the process of Function 112.
Remarks :
■ The graphics data stored in the printer buffer is printed.
■ This command is available in standard mode, not in page mode.
■ The graphics data is defined by Function 112.
■ The required amount of line feed pitch is used for printing graphics data, regardless of the existing setting value of the
pitch.
Differences:
None