User manual

Metapace T-3
Rev. 1.00
- 63 -
<Function 3> GS ( E pL pH fn [a1 b18...b11]...[ak bk8...bk1] (fn=3)
Code:
ASCII
GS ( E pL fn [a1 b18...b11]... [ak bk8...bk1]
Hex
1D 28 45 pL fn [a1 b18...b11]... [ak bk8...bk1]
Decimal
29 40 69 pL fn [a1 b18...b11]... [ak bk8...bk1]
Range:
10≤ (pL + pH x 256) ≤ 65535
fn=3
a=1,2,3,4,5,6,11,12
b=48, 49, 50
Default:
All switches are set to Off(b = 48)
Description:
■ This command changes all the Memory Switch(Msw) 1 through 8 to the value specified by b simultaneously as
follows:
• When b=48, 49, the corresponding bit is set to Off and On respectively.
• When b=50, there is no change in the memory switch.
■ The setting items of the memory switch 1 are as follows:
Value
Msw
2 1
Function Remark
48 48 Print speed 3 250 mm/s
48 49 Print speed 2 230 mm/s
1-1~2
49 48 Print speed 1 200 mm/s
• The printer supports 3 different printing speeds.
Please be sure that the printing quality at higher speed may be worse than at the lower.