User manual

Metapace T-3
Rev. 1.00
- 56 -
GS !
Function: Select character size
Code:
ASCII
GS ! n
Hex
1D 21 n
Decimal
29 33 n
Range:
0 ≤ n ≤ 255
(1 ≤ Vertical enlargement ≤ 8, 1 ≤ Horizontal enlargement ≤ 8)
Default:
n = 0
Description:
■ This command selects the character height and width using bits 0 to 3, and bits 4 to 7 respectively as follows:
Bit Function Setting
0
1
2
3
Specifies the number of times normal font
size in the vertical direction
Refer to Table 2
[Enlarged in vertical direction]
4
5
6
7
Specifies the number of times normal font
size in the horizontal direction
Refer to Table 1
[Enlarged in horizontal
direction]