User manual

Metapace T-3
Rev. 1.00
- 50 -
ESC v
Function : Transmit paper sensor status
Code :
ASCII
ESC v
Hex
1B 76
Decimal
27 118
Range:
None
Default:
None
Description :
■ This command transmits a byte of data specifying the paper sensor status.
■ The status of paper near end and paper end sensors is sent to the host as follows:
• When paper near end is detected, 0x03 is transmitted.
• When paper end is detected, 0xC is transmitted.
Remarks :
■ The paper sensor status can be transmitted using GS r.
■ The near end senor is optional while paper end sensor required.
■ If the printer is not equipped with a near end sensor, the paper near end sensor is considered as normal condition.
Differences:
None