User manual

Metapace T-3
Rev. 1.00
- 37 -
ESC S
Function: Select standard mode
Code:
ASCII
ESC S
Hex
1B 53
Decimal
27 83
Range:
None
Default:
None
Description:
This command enables standard mode.
Remarks:
■ The data in the printer buffer is cleared and the setting by ESC W returns to the default.
■ The conditions by the following commands are defined independently in standard mode and page mode.
• ESC SP, ESC 2, and ESC 3
■ In standard mode, CAN, ESC FF and GS $ are ignored.
Differences:
None