User manual

Metapace T-3
Rev. 1.00
- 110 -
GS H
Function: Selects print position of HRI characters
Code:
ASCII
GS H n
Hex
1D 48 n
Decimal
29 72 n
Range:
0 ≤ n ≤ 3, 48 ≤ n ≤ 51
Default:
n = 0
Description:
■ This command selects the printing position of HRI (Human Readable Interpretation) characters when printing a bar
code.
• The printing position is set according to the value of as follows:
n Printing position
0, 48 Not printed
1, 49 Above the bar code
2, 50 Below the bar code
3, 51 Both above and below the bar code
Remarks:
■ The font of the HRI characters is defined by GS f.
■ The setting of this command remains effective until ESC @, printer reset or power cycling is executed.
Differences:
None