User manual

Metapace T-3
Rev. 1.00
- 106 -
GS /
Function: Print downloaded bit image
Code:
ASCII
GS / m
Hex
1D 2F m
Decimal
29 47 m
Range:
0 ≤ m ≤ 3, 48 ≤ m ≤ 51
Default:
None
Description:
This command prints the downloaded bit image defined by GS * according to the mode denoted by m.
DPI : Dots per Inch (25.4mm)
m Mode Vertical dot density(DPI) Horizontal dot density(DPI)
0, 48 Normal 180 180
1, 49 Double-width 180 90
2, 50 Double-height 90 180
3, 51 Quadruple 90 90
Remarks:
■ The download bit image is defined by GS *.
■ This command is ignored when if a downloaded bit image is not defined.
■ In standard mode, this command works only when the print buffer is empty and the printer is in the start of the
line. m is treated as normal data if the print buffer has data.
■ In page mode, the bit image data is accumulated in the print buffer, but does not perform the actual printing.
■ Except for character size and upside-down printing mode, none of print mode such as emphasized, double-strike, etc,
affects the printing of the downloaded bit image.
■ The default dot density set by GS L is applied to printing of the downloaded bit image.