User manual

188
Enter Setup
Metapace S-2 Hardware Manual
5.6 MULTI-BARCODE EDITOR
The Multi-Barcode Editor allows you to decide the output sequence of a concatenation of
barcodes. Up to five barcodes can be specified. Enabling this mode will force the scanner
to apply Laser mode as the scan mode. The maximum output data length of the
concatenated barcodes is 10KB after configuration. The concatenation will not take effect
if the data length exceeds 10KB.
Note: The Multi-Barcode Editor has nothing to do with
Multi-Barcode Mode.
The barcodes that are found meeting the specified criteria below will be arranged in the
desired sequence.
 Code Type
 4-digit barcode length, excluding prefix, suffix, length code, etc.
 Matching the first character of barcode data