User manual

134
Enter Setup
Metapace S-2 Hardware Manual
4.13.5 CONVERT TO UPC/EAN
This only applies to GS1 DataBar Omnidirectional and GS1 DataBar Limited barcodes not
decoded as part of a Composite barcode.
 Convert to EAN-13: It will strip the leading “010＂ from barcodes.
“ 01” is the Application ID and must be followed by a single zero (the first digit
encoded).
 Convert to UPC-A: It will strip the leading “0100＂ from barcodes.
“01” is the Application ID and must be followed by two or more zeros (but not six
zeros).
Convert to UPC/EAN
*Do Not Convert