Cut Sheet

Metalux • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL [phone] • FAX [phone]
05/18/2009 6:24:58 PM
Specifications and Dimensions subject to change without notice.
ADF090623
ACCESSORIES (Order Separately)
ORDERING INFORMATION
SHIPPING INFORMATION
SNF T12
AYC-Chain/Set=36" Chain Hanger (Use 1 Set Per Fixture)
SCF=Fixed Stem Set (Specify Length)
SCS=Swivel Stem Set (Specify Length)
SCA=Adjustable 48" Stem Set
EYE-CHAIN/SET-B=Eye Bolt Chain (Use 1 Set Per Fixture)
SNF-ASY-3
(2)
=3" Asymmetric Reflector (Specify 18", 2' or 3')
SNF-SYM-3
(2)
=6" Symmetric Reflector (Specify 18", 2' or 3')
SNF-REV-3
(2)
=Reverse Asymmetric Reflector (Specify 18", 2' or 3')
WG/SNF-2FT=2' Wire Guard
WG/SNF-3FT=3' Wire Guard
A1B/Spacer-U=Spacer 1-1/2" to 2-1/2" from ceiling (Use 2 Per Fixture)
TOGGLE=Single Toggle NO. 2 (Specify Length)
Y-TOGGLE=Y Toggle NO. 2 (Specify Length)
(Additional Accessories Available. See Options and Accessories Section.)
NOTES:
(1)
Products also available in non-US voltages and frequencies for international markets.
(2)
For SilverLining reflector add
SS in Catalog Number, Example: SNF-ASY-SS-4.
(3)
Not available for 2' version.
(4)
Maximum width clearance for ballast in channel
is 2-7/32".
(5)
Socket brackets left uninstalled.
Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative for availability and
ordering information.
SAMPLE NUMBER: SNF -120-LTS-120V- U
Tandem
Blank=18", 2' or 3'
Series
SNF=Commercial
Narrow Striplite
Number of Lamps
1=1 Lamp
(Not Included)
Voltage
(1)
120V=120 Volt
277V=277 Volt
Wattage
15=15W T12 (18")
20=20W T12 (24")
30=30W T12 (36")
Options
(1)
GL=Single Element Fuse
GM=Double Element Fuse
EL4LP=Low Profile
Emergency Installed
(3), (4)
Options
RIF1=Radio Interference
Suppressor
6-3/18 SJT-C&P-515P=
Cord & Plug (120V)
(15 AMP)
(5)
6-3/18 SJT-C&P L715P=
Cord & Plug (277V)
(15 AMP)
(5)
PI/CPI=Plug-In Option
(5)
Packaging
U=Unit Pack
6B=6 Bulk Packing (96")
Ballast Type
(1), (4)
Blank=Standard Magnetic Ballast
LE3=T12 Magnetic Energy Saving
EB2
=T12 Electronic Rapid Start.
Total Harmonic Distortion < 20%
(30 Watt only)
No. of Ballast
1
Ballast Start Type
LTS=Low Trigger
Start (20W only)
(120V only)
HTS=High Trigger
Start (20W only)
LRS=Low Rapid
Start (30W only)
(120V only)
HRS=High Rapid
Start (30W only)
(120V only)
SNF-115 12 lbs.
SNF-120 12 lbs.
SNF-130 12 lbs.
Catalog No. Wt.