Specification Sheet

Specifications and
dimensions subject to
change without notice.
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
SAMPLE NUMBER: HBLED-LD5-18SE-W-UNV-L850-ED2-U
Lamp Type
LD5=LED 5.0
LED Lumen Output
12SE=12,000 Lumens
15SE=15,000 Lumens
18SE=18,000 Lumens
24SE=24,000 Lumens
30SE=30,000 Lumens
36SE=36,000 Lumens
44SE=44,000 Lumens
54SE=54,000 Lumens
(14)
54SEHT=54,000 Lumens
(16)
Series
(22)
HBLED=LED
High Bay Linear
Voltage
(1)
120V=120 Volt
277V=277 Volt
347V=347 Volt
(6), (10)
480V=480 Volt
(6), (10), (17), (20)
UNV=Universal Voltage 120-277
UNC=Universal Voltage 347/480
(6)
Shielding
[Blank]=None
A=Prismatic Acrylic Lens
and Doorframe
(8), (9), (11), (19)
CL=Clear Acrylic Lens and
Doorframe
(8), (11), (19)
A/WG=Acrylic Lens, Wireguard
and Doorframe
(8), (9), (11), (19)
CL/WG=Clear Lens, Wireguard
and Doorframe
(8), (11), (19)
AI=Prismatic Acrylic Lens Insert
(8), (9)
CLI=Clear Acrylic Lens Insert
(8)
FLI=Frosted Lens Insert
(8), (9)
POLY125/WG=Polycarbonate Lens, Wireguard and Doorframe
(8), (11), (19)
POLY125=Polycarbonate Lens and Doorframe
(8), (11), (19)
Distribution
N=Narrow (Aisle)
W=Wide (General)
Options
MP=Modular Power
Receptacle (used for all
Cord or Cord and Plug
options)
(3)
Packaging
U=Unit Pack
PALC=Job Pack
In Carton
Options
(5)
Emergency
EL7W=7-watt, 120V-277V emergency
battery pack installed
(4)
EL14W=14-watt 120V-277V emergency
battery pack installed
(4)
Accessories (order separately)
HBL-SPM=Single Monopoint Hanger w/Hub
HBL-SPM-S=Surface Mount Bracket
FH-1=Fixture Hook
FL-1=Fixture Loop
Y-TOGGLE=Y Mounting Toggle, #2 Cable (8)
(Specify 10' or 30', requires 2 per fixture)
HBAYC-CHAIN/SET/U=(2) V-Hook Hangers, 36" Chain Sets
w/S-Hooks
MPC3=3' Modular Power Cord & Plug (Specify Voltage)
MC6=6' Modular Power Cord
MPC6=6' Modular Power Cord & Plug (Specify Voltage)
MMS=360° or 180° Aisle Motion Sensor with Modular
Power Receptacle (120-277V)
Includes V Hangers for rapid installation
Driver Type
CD=0-10V Dimming
Driver
(7), (8)
ED=Electronic Fixed
Output Driver
(7)
5LTD=Fifth Light
DALI
(7), (8), (13)
Number of Drivers
1=1 Driver (12,000 and
15,000 lumen version)
2=2 Drivers (18,000, 24,000
and 30,000 lumen version)
3=3 Drivers (36,000 and
44,000 lumen versions)
4=4 Drivers (54,000 lumen
version)
WG/HBL6-4FT-B=Field Installable, Wireguard for HBLED
(12)
ISHH-01=Programming Remote for Integrated Sensor
ISHH-02=Personal Control Remote for Integrated Sensor
CCT
L835=3500K
L840=4000K
L850=5000K
Motion Sensors
MS=360° or 180° Motion Sensor
Installed, (specify voltage)
(2)
SVPD3=Integrated occupancy and daylight
dimming sensor, 1200 sq. ft. coverage
(15), (19), (21)
LWR=LumaWatt Wireless Sensor system
NOTES:
(1)
Voltage must be specified when ordered with plugs or emergency drivers .
(2)
When ordering MS option, specify as UNV (for 120 or 277V), 347 or 480V.
(3)
Requires use of MC or MPC cord accessories,
specify voltage for plugs (MP).
(4)
With integral test switch/indicator/laser test. For approximate delivered lumens multiply the lumens per watt of the desired fixture by the wattage of the emergency battery pack (100
lm/W x 7=700 lumens). IES-format photometry for luminaire under emergency operation available.
(5)
EM options available in 0°C - 40°C ambient.
(6)
Not available with dual switching.
(7)
Lumen output will vary
depending on dimming or fixed output drivers. Refer to IES files for deliveried lumens.
(8)
Rated for 40°C ambient.
(9)
Not available with narrow distribution.
(10)
EM not available with 36SE, 44SE or 54SE
configurations at 347V or 480V)
(11)
Not available with 44SE or 54SE configurations.
(12)
Not available with lens insert options AI, CLI and FLI or doorframe options A, CL and POLY125.
(13)
5LTD available with 12, 18,
24, 36 lumen packages only.
(14)
40ºC max. ambient rating.
(15)
Integrated sensor limited to 36,000 lumens.
(16)
HT lumen package not available with 347 or 480V, emergency, dimming, or lensed options.
(17)
480V not
for use with impedance grounded systems or corner grounded systems (commonly known as Three Phase Three Wire Delta, Three Phase High Leg Delta and Three Phase Corner Grounded Delta systems).
(19)
Integrated sensor not compatible with door frame.
(20)
Only for use with 480V Wye systems. Per NEC, not for use with ungrounded systems, impedance grounded systems or corner grounded systems (commonly
known as Three Phase Three Wire Delta, Three Phase High Leg Delta and Three Phase Corner Grounded Delta systems).
(21)
Integral sensor works only with “CD” driver and is factory prewired to the driver for
stand-alone control.
(22 )
DesignLights Consortium™Qualified and classified for both DLC Standard and DLC Premium, refer to www.designlights.org for details.
Specifications & dimensions subject to change without notice. Consult your Eaton Representative for availability and ordering information.
(18)
Used to transfer fixture to secondary power during outage. Must be used in conjunction with UL 1008 device (provided by others). These options require 2 relays on fixtures with dimming drivers. ETRD option
only requires one relay when used on a dimming fixture. A maximum of two devices can be used on one product. 3 or 4 driver products cannot use GTR or ETR.
GTR=Bodine Generator Transfer Device
(18)
ETR=Iota Emergency Transfer Relay
(18)
ETRD=Iota Emergency Transfer Relay with
dimming control
(18)
Number of Relays
1=1 relay per driver non-dimming only
2=2 relays per driver for dimming applications
ORDERING INFORMATION
HBLED SE
PS519137EN
10-12-2017
Catalog No. Wt.
HBLED-LD5-12SE 19 lbs.
HBLED-LD5-15SE 19 lbs.
HBLED-LD5-18SE 22 lbs.
HBLED-LD5-24SE 22 lbs.
HBLED-LD5-30SE 22 lbs.
HBLED-LD5-36SE 24 lbs.
HBLED-LD5-44SE 24 lbs.
HBLED-LD5-54SE 26 lbs.
SHIPPING DATA