Technical Specifications

HBL T5 H IG H- BAY I NDUS TR IA L LU MINAI RE
Ordering Information Sample Number: HBL-654T5-N-UNV-EBT2-UPL-U Includes V Hangers for rapid installation
(7)
29
Ballast Type
(3), (6)
T5 Systems
EBT
=T5 Linear Electronic Program
Rapid Start.
(2)
Total Harmonic Distortion < 10%
EHT
=T5 Linear Electronic Program Start
High Ambient.
(2), (3)
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
No. of Ballast
1, 2 or 3
No. of Lamps
4=4 Lamps
6=6 Lamps
8=8 Lamps
10=10 Lamps
Lamp Type
49T5=49W T5HO (4') Lamps
51T5=51W T5HO (4') Lamps
54T5=54W T5HO Lamp (48" Long)
Series
HBL=Linear High Bay
Width
Blank=20" wide
4 & 6 Lamp
(nominal)
26" wide 8 & 10
Lamp (nominal)
Voltage
(1)
UNV=Universal 120/277 Voltage
UNC=Universal
347/480 Voltage
120V=120 Volt
277V=277 Volt
347V=347 Volt
Distribution
N=Narrow Beam (Standard)
M=Medium Beam
W=Wide Beam
Options
UPL=Uplight Apertures on Reflector
MP=Modular Power Receptacle
(Used for all Cord or Cord and
Plug options)
(4)
MWS=Modular Wiring System
(5)
MS=360° or 180° Motion Sensor installed
(120V through 347V or 480V )
(1)
Packaging
U=Unit Pack
PALC=Palletized
In Carton
Options
Lamps Installed
L8535=T5HO Lamp, 85CRI 3500K
L8541=T5HO Lamp, 85CRI 4100K
L8550=T5HO Lamp, 85CRI 5000K
GL=Single Element Fuse
GM=Double Element Fuse
EL=Emergency Installed
NOTES:
(1)
Voltage must be specified when ordered with plugs or emergency ballasts. For MS option,
indicate UNV (for 120V or 277V), 347V or 480V.
(2)
EBT ballast systems suitable for operation in
ambient environments up to 104°F (40°C) in uplight configuration.
(3)
EHT/HT5/HCT5 ballast systems
are suitable for ambient environments not to exceed 149°F (65°C) in uplight configurations.
(4)
Requires use of MC or MPC cord accessories, specify voltage for plugs.
(5)
Cannot be com-
bined with Modular Power Receptacle (MP). For MWS with MP, choose MP in fixture logic and then
choose MWS.
(6)
Recommended when using motion sensor options or accessories.
(7)
Can be used in
high abuse applications such as gymnasiums.
Accessories (order separately)
HBL-SPM=Single Monopoint Hanger w/Hub
RH-1=Retrofit Hanger
FH-1=Fixture Hook
FL-1=Fixture Loop
Y- TOGGLE=Y Mounting Toggle, #2 Cable (Specify 10' or 30')
HBAYC-CHAIN/SET/U=(2) V-Hook Hanger, 36" Chain Sets
w/S-Hooks
MC3=3' Modular Power Cord
MPC3=3' Modular Power Cord & Plug (Specify Voltage)
MC6=6' Modular Power Cord
MPC6=6' Modular Power Cord & Plug (Specify Voltage)
MMS=360° or 180° Aisle Motion Sensor with Modular
Power Receptacle (120-277V)
(4)
WG/HBL6-4FT-B=4/6 Lamp Wireguard w/Clips
WG/HBL8-4FT-B=8 Lamp Wireguard w/Clips
19-17/32"
[496mm]
48-7/16" [1230mm]
Dimensions
HBL Lamp Configurations
Dimensions for Top View
25-1/4"
[641mm]
48-7/16" [1230mm]
20-11/32" [517mm] 24-19/32" [625mm]
4 & 6 Lamp
8 & 10 Lamp
Ballast Type
T5HO Systems
T5=(2) 120/277V 4/2 Lamp T5
Electronic Program Rapid Start
(8)
HT5=(2) 120/277V 4/2 Lamp T5 High
Ambient Electronic Program Rapid Start
(9)
Quick Ship Ordering Information Sample Number: HBL454T5-MP-UPL-L5
Quick Ship orders ship in 5 days in order quantities not to exceed 200 pieces.
NOTE: Orders received after noon are entered on the following day.
No. of Lamps
4=4 Lamps
6=6 Lamps
Lamp Type
51=51W T5HO Lamps (48")
54=54W T5HO Lamps (48")
Family
HBL
Power Receptacle
MP=Modular Power
Receptacle
(10)
Uplight
Blank=No Uplight
UPL=Uplight
NOTES:
(8)
T5 ballast systems suitable for operation in ambient environments up to 104°F (40°C) in uplight configuration.
(9)
EHT/HT5/HCT5 ballast systems are suitable for ambient environments not
to exceed 149°F (65°C) in uplight configurations.
(10)
Requires use of MC or MPC cord accessories, specify voltage for plugs.
(11)
For Quick Ship, lamping option only available w/54W lamp type.
Lamping
Blank=No Lamps
L4=Lamps Installed 85+CRI 4100K
(11)
L5=Lamps Installed 85+CRI 5000K
(11)
L5ES=Energy Savings Lamps Installed
85+CRI 5000K
19-17/32" [496mm]
2-15/32" [63mm]
4-Lamp
19-17/32" [496mm]
2-15/32" [63mm]
6-Lamp
2-15/32" [63mm]
25-1/4" [641mm]
8-Lamp
2-15/32" [63mm]
25-1/4" [641mm]
10-Lamp
Includes V Hangers for rapid installation
(7)
Distribution
Blank=Narrow Beam
W=Wide Beam