Installation Manual

2
EATON ADF140678 Installation instructions
Installation Instructions – Standard Highbay Motion Sensor (MS)
Fixture
Motion Sensor and Bracket Assembly
Screws (pre-installed)
Figure 1.
Motion Sensor Reading Surface
Figure 2.
INSTALLATION
Highbay Motion Sensor
1. Insert motion sensor and bracket to pre-installed
screws on fixture endplate. (Figure 1.)
2. Secure bracket by tightening screws on fixture
endplate. (Figure 2.)
3. Rotate motion sensor reading surface (LENS) so that it
is parallel with floor. (Figure 2.)
4. Push motion sensor forward to lock sensor into
position.
All Other Motion Sensor
1. Insert motion sensor and bracket to pre-installed
screws on fixture endplate. (Figure 1.)
2. Secure bracket by tightening screws on fixture
endplate. (Figure 2.)
3. Rotate motion sensor reading surface (LENS) so that it
is parallel with floor. (Figure 2.)