Cut Sheet

Metalux
SPECIFICATION FEATURES
Construction
Shallow 3-1/4" deep housing is
die formed of code gauge, prime
cold rolled steel. Heavy gauge end
plates are securely attached with
screws for strength and rigidity
and the elimination of gaps. Four
auxiliary fixture end suspension
points are provided. KOs for
continuous row wiring. Large
access plate for supply connection.
Electrical
Ballasts are Class “P” and are
positively secured. Rotor-lock
lampholders ensure positive lamp
retention. UL/CUL Listed Type IC
Recessed Luminaire (Rated for
direct contact with insulation).
Suitable for damp locations.
Ballast Access
Ballast can be removed from
below without tools.
Finish
Durable cold rolled steel with
multistage, iron phosphate
pretreatment and white enamel
finish to ensure maximum bonding
and rust inhibition.
Reflectors
Reflector has high reflectance
baked matte white enamel finish
for luminous uniformity.
Shielding
Positively retained frosted acrylic
profile lenses provide a soft but
effective distribution of light.
Controls
Fifth Light ballast options are
offered for both 0-10V continuous
dimming and DALI applications.
Combine with energysaving
products like occupancy sensors,
daylighting controls, and lighting
relay panels from Cooper Controls
(www.coopercontrol.com) to
maximize energy savings.
2ACIC
228T5
2' X 4' RECESSED
T5 LAMPS
Troffer Series
For Use In Insulated
Ceilings
ADF100843
June 18, 2018 2:28 PM
The accord™ redefines fluorescent lighting by improving on aesthetics,
comfort and energy savings. The accord™ provides the right amount of
light while eliminating surface shadows commonly found in parabolics.
Therefore, accord™ increases the comfort level while providing
significant energy savings.
The accord™ is the ideal solution for offices, schools, hospitals, retail and
other applications. 2ACIC is designed for installations when the housing
will be in direct contact with insulation.
DESCRIPTION
ENERGY DATA
Input Watts:
EB Ballast & STD Lamps @ 277V
228T5 (58)
Luminaire Efficacy Rating
LER =FL75 LPW
Catalog Number: 2ACIC-228T5
Yearly Cost of 1000 lumens,
3000 hrs at .08 KWH = $2.99
*Reference the lamp/ballast data in the
Technical Section for specific lamp/
ballast requirements.
**Consult Pre Sales Technical Support.
***See Drywall Frame Kit Accessory
23-3/4"
[603mm]
3-1/4"
[83mm]
48" [1219mm]
8" [204mm]
Access Plate
23-3/4"
[603mm]
4-13/16" [123mm]
1-1/2" [204mm]
NOTE: 2' x 2' and 2' x 4' allow for row mounting
(1' x 4' does not support feature)
MOUNTING DATA
23-3/4" [603mm]
3-1/4"
[83mm
]
11-3/4" [298mm]
LAMP CONFIGURATIONS
G
Grid/Lay-in
Standard
F
Drywall Frame
Kit
Ceiling Trim
Type** Type
Exposed Grid G
Concealed
TG
or T
Slot Grid G or T
Flang
e*
**
CEILING COMPATIBILITY
LAMPS CONTAIN MERCURY. DISPOSE ACCORDING
TO LOCAL, STATE OR FEDERAL LAWS
Safe and convenient means of
disconnecting power.
Catalog #
Project
Comments
Prepared by
Type
Date