Cut Sheet

COOPER LIGHTING
DESCRIPTION
The Accord
TM
redefines fluorescent lighting by improving on aesthetics,
comfort and energy savings. The Accord provides the right amount
of light while eliminating surface shadows commonly found in
parabolics. Therefore, Accord increases the comfort level while
providing significant energy savings.
The Accord is the ideal solution for offices, schools, hospitals, retail
and other applications. 2ACIC is designed for installations when
the housing will be in direct contact with insulation.
EB Ballast & STD Lamps @ 277V
228T5 (58)
Luminaire Efficacy Rating
LER =FL75 LPW
Catalog Number: 2ACIC-228T5
Yearly Cost of 1000 lumens,
3000 hrs at .08 KWH = $2.99
*Reference the lamp/ballast data in the
Technical Section for specific lamp/ballast
requirements.
**Consult Pre Sales Technical Support.
***See Drywall Frame Kit Accessory
2ACIC
228T5
T5 LAMPS
2' x 4' Recessed
Troffer Series
For Use In Insulated
Ceilings
ENERGY DATA
Input Watts:
SPECIFICATION FEATURES
Construction
Shallow 3-1/4" deep housing is die
formed of code gauge, prime cold
rolled steel. Heavy gauge end
plates are securely attached with
screws for strength and rigidity
and the elimination of gaps. Four
auxiliary fixture end suspension
points are provided. KOs for con-
tinuous row wiring. Large access
plate for supply connection.
Electrical*
Ballasts are Class “P” and are pos-
itively secured. Rotor-lock lam-
pholders ensure positive lamp
retention. UL/CUL Listed Type IC
Recessed Luminaire (Rated for
direct contact with insulation).
Suitable for damp locations.
Ballast Access
Ballast can be removed from
below without tools.
Finish
Durable cold rolled steel with
multistage, iron phosphate
pretreatment and white enam-
el finish to ensure maximum
bonding and rust inhibition.
Reflectors
Reflector has high reflectance
baked matte white enamel fin-
ish for luminous uniformity.
LAMP CONFIGURATIONS
ADF100843
Shielding
Positively retained frosted acrylic
profile lenses provide a soft but
effective distribution of light.
Controls
Fifth Light ballast options are
offered for both 0-10V continuous
dimming and DALI applications.
Combine with energysaving prod-
ucts like occupancy sensors, day-
lighting controls, and lighting relay
panels from Cooper Controls
(www.coopercontrol.com) to
maximize energy savings.
MOUNTING DATA
48" [1219mm]
8" [204mm]
Access Plate
23-3/4"
[603mm]
4-13/16" [123mm]
1-1/2" [204mm]
NOTE: 2' x 2' and 2' x 4' allow for row mounting
(1' x 4' does not support feature)
Catalog #
Ty p e
Date
Project
Comments
Prepared by
LAMPS CONTAIN MERCURY. DISPOSE ACCORDING TO
LOCAL, STATE OR FEDERAL LAWS
Safe and convenient means of
disconnecting power.
COOPER LIGHTING - METALUX
®
Catalog #
Ty p e
Date
Project
Comments
Prepared by
23-3/4"
[603mm]
3-1/4"
[83mm]
23-3/4" [603mm]
3-1/4"
[83mm]
11-3/4" [298mm]
CEILING COMPATIBILITY
G
Grid/Lay-in
Standard
F
Drywall Frame
Kit
Ceiling Trim
Type** Type
Exposed Grid G
Concealed T G or T
Slot Grid G or T
Flange ***