Manualshelf

Installation Guide

ManualsBrandsMetalux ManualsCommercial LightingCruze 2 ft. x 4 ft. White Integrated LED Troffer Retrofit Kit 4000K Color Temperature Cool White
12345678910
4
EATON IB519034EN Installation instructions
Installation Instructions – Cruze LED Retrofit Kit
If retrofit kit is equipped with sensor and/or Emergency
options, please proceed to page 5 of Installation
Instructions. If not, please proceed to #13 on page 4.
13. Secure Lens (C) under tabs on one side of either panel
and press lens over the tabs on opposite panel. Be sure
lens engages all tabs. The installation is now complete.
ote:N This retrofit kit is designed to fit a wide range of
luminaire housings. Some existing housings may be
bent or bowed which can cause the kit to fit tightly
and/or be difficult to install. A flat blade screwdriver
may be needed to assist in the fitting of the kit in the
existing luminaire.
ote:N Dispose and/or recycle all material according to
Federal, State, and local laws.