Installation Guide

2
Figure 2.
5. Pass fixture through the grid at a 45 degree angle and lay fixture into the
grid (Fig. 2).
Figure 3
.
6. Alignment clips are provided for additional retention to ceiling system.
Orient 4 tabs on back of fixture over T-GRID by bending tabs up 90
degrees perpendicular to back of fixture. Next bend tabs 90 degrees
towards T-GRID frame (Fig. 3)
Figure 4.
NOTE: All models are low-voltage (0-10V) dimming capable. Install dimming
wires by connecting the low voltage violet (Dim +) and grey (Dim -) leads from
the driver to wires pulled from your low voltage 0-10V dimmer switch. Also
refer to your dimmer instructions for further instructions.
7. Use open knockout to bring in supply wire. Using the Wire Nuts - (3 pcs. 14
AWG & 2 pcs 8 AWG) attach the ground wire with the supply ground wire,
the black wire to the black supply wire, and the white (common) wire to the
white supply wire (Fig. 4)
5-YEAR LIMITED WARRANTY
THE FOLLOWING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES,
WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING, BUT NOT LIMITED TO, ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
Cooper Lighting Solutions warrants to customers that, for a period of ve years from the
date of purchase, Cooper Lighting Solutions products will be free from defects in materi-
als and workmanship. The obligation of Cooper Lighting Solutions under this warranty is
expressly limited to the provision of replacement products. This warranty is extended only
to the original purchaser of the product. A purchasers receipt or other proof of date of
original purchase acceptable to Cooper Lighting Solutions. This is required before warranty
performance shall be rendered. This warranty does not apply to Cooper Lighting Solutions
products that have been altered, repaired or that has been subjected to neglect, abuse,
misuse or accident (including shipping damages). This warranty does not apply to products
not manufactured by Cooper Lighting Solutions which have been supplied, installed, and/or
used in conjunction with Cooper Lighting Solutions products. Damage to the product caused
by replacement bulbs or corrosion or discoloration of brass components are not covered by
this warranty.
LIMITATION OF LIABILITY:
IN NO EVENT SHALL COOPER LIGHTING SOLUTIONS BE LIABLE FOR SPECIAL, INDIRECT,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (REGARDLESS OF THE FORM OF ACTION,
WHETHER IN CONTRACT, STRICT LIABILITY, OR IN TORT INCLUDING NEGLIGENCE), NOR
FOR LOST PROFITS; NOR SHALL THE LIABILITY OF COPPER LIGHTING SOLUTIONS FOR ANY
CLAIMS OR DAMAGE ARISING OUT OF OR CONNECTED WITH THESE TERMS OR THE
MANUFACTURE, SALE, DELIVERY, USE, MAINTENANCE, REPAIR OR MODIFICATION OF
COOPER LIGHTING SOLUTIONS PRODUCTS, OR SUPPLY OF ANY REPLACEMENT PARTS
THEREFORE, EXCEED THE PURCHASE PRICE OF COOPER LIGHTING SOLUTIONS PROD-
UCTS GIVING RISE TO A CLAIM. NO LABOR CHARGES WILL BE ACCEPTED TO REMOVE OR
INSTALL FIXTURES.
To obtain warranty service, please contact Cooper Lighting Solutions, at 1-800-334-6871,
press option 2 for Customer Service, or via e-mail ConsumerProducts@cooperlighting.com
and include the following information:
• Name, address and telephone number
• Date and place of purchase
• Catalog and quantity purchase
• Detailed description of problem
All returned products must be accompanied by a Return Goods Authorization Number issued by the
Company and must be returned freight prepaid. Any product received without a Return Goods
Authorization Number from the Company will be refused. Cooper Lighting Solutions is not responsible
for merchandise damaged in transit. Repaired or replaced products shall be subject to the terms of this
warranty and are inspected when packed. Evident or concealed damage that is made in transit should
be reported at once to the carrier making the delivery and a claim filed with them.
Reproductions of this document without prior written approval of Cooper Lighting Solutions are strictly prohibited.
For assistance, call 1-800-334-6871 or e-mail us at ConsumerProducts@cooperlighting.com
ARTICLES NÉCESSAIRES
(à acheter séparément)
Tournevis cruciforme • Marteau
Tournevis à tête plate • Lunettes et gants de sécurité
Coupe-ls • Pinces coupantes
Échelle
IMPORTANTES INSTRUCTIONS DE SÉCURI
Risque d’incendie, de décharge électrique, de coupure ou d’autres dangers-
L’installation et la réparation de ce produit doivent être faites par un électricien
qualifié. Ce produit doit être installé conformément au code dinstallation
applicable par une personne qui connaît bien la construction, le fonctionnement
du produit et les dangers encourus.
Risque d’incendie ou de décharge électrique- Assurez-vous que lalimentation
électrique est HORS TENSION avant de commencer linstallation ou de tenter
d’en faire l’entretien. Coupez l’alimentation électrique au niveau du fusible ou du
disjoncteur.
Risque d’incendie- Conducteurs d’alimentation puovant supporter un minimum
de 90°C.
Risque de brûlure-branchez la source d’alimentation et laissez refroidir le
luminaire avant de proder à son entretien ou à sa manipulation.
Risque de blessure- À cause des bords tranchants, manipulez ce produit avec
soin.
La désoissance aux instructions suivantes repsente un risque de blessures
graves ou mortelles et de dommages matériels.
FRANÇAIS
2' x 2' 1' x 4' 2' x 4'
5 lbs (2.3kg) 5.7 lbs (2.6 kg) 9.7 lbs (4.4 kg)
8. To clean fixture use a small amount of water on a cloth and wipe the
lens. Do not use chemicals on the lens as this could cause damage.
9. Tuck all wires and wire nuts into the fixture junction box and replace cover.
10. Turn breaker on. Use wall switch to verify light turns on.
Supply Wire
Ground
Dimming Wires
Black
White
Grey / Violet (D
imming Models only)
Green