Specification Sheet
Specifications and
dimensions subject to
change without notice.
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
PS519068EN
11-27-2017
22SR LED 2’ X 2’
SAMPLE NUMBER: 22SR-LD2-29-C-UNV-L835-CD1-SVPD1-U
Options
Emergency
EL7W=7-watt, 120V-277V emergency battery pack installed
(2)
EL14W=14-watt 120V-277V emergency battery pack installed
(2)
GTD2=Bodine Generator Transfer Device
(10)
ETS2=IOTA Emergency Transfer Switch
(10)
CCT
L830=3000K
L835=3500K
L840=4000K
Flex
(9)
Multiple Configurations Available
Optics
Blank=Standard
Series
22SR=2' x 2' SkyRidge
Series
ACCESSORIES
T3A END E.Q. BRACKET PARTS BAG (Standard with fixture)
DF-22-W=2' x 2' Drywall Frame Kit
SK-22-WT=2' x 2' Tall Surface Mount Kit
DF10P-C =Decorator Dimmer, 0-10V
SF10P- =Decorator Slide Dimmer, 0-10V
ISHH-01=Programming Remote for Integrated Sensor
ISHH-02=Personal Control Remote for Integrated Sensor
Rating
Blank=Standard
ATW-SW4= Chicago
Rated
(3)
Lamp Type
LD2=LED 2. 0
Air
[Blank]=Standard
A=Air (Vented)
(4)
Reflector
C=Curved (Standard)
S=Straight
Stock Lumen Outputs
20=2000 Lumens
29=2900 Lumens
MTO Lumen Outputs
25=2500 Lumens
(5)
NOTES:
(1)
Products also available in non-US voltages and frequencies for international markets.
(2)
With integral test switch/indicator/laser test. For approximate delivered lumens multiply the lumens per watt of the
desired fixture by the wattage of the emergency battery pack (100 lm/W x 7=700 lumens). IES-format photometry for luminaire under emergency operation available.
(3)
Chicago rated version does not allow for row
mounting.
(4)
Air version is vented but does not meet air handling requirements. Air version is non-IC. Air version is not available with integrated sensor.
(5)
DesignLights Consortium
®
Qualified and classified for DLC
Standard, refer to www.designlights.org for details.
(6)
Fixtures using factory installed SkyTrim option are not DLC qualified.
(7)
Must be used in conjunction with a DALI control system. For complete DALI solutions by
Fifth Light, visit www.eaton.com/lightingsystems
(8)
Integral sensors work with CD and HCD drivers only and is factory prewired to the driver for stand-alone control.
(9)
Flex does not include dimming leads. Control leads
provided by others.
(10)
Used to transfer fixture to secondary power source for life-safety operation. When used with a dimming fixture, two devices are required to ensure control is disabled while operating under
emergency power.
(11)
SR driver compatible with LWI option only.
(12)
LWT compatible with CD and HCD drivers only.
(13)
LWT sensor is external to luminaire, cable factory wired. Must be used in conjunction with a
LumaWatt Pro control system. For complete LumaWatt Pro wireless solutions, visit www.eaton.com/lumawattpro
Specifications & dimensions subject to change without notice. Consult your Eaton Representative for availability and ordering information.
Driver Type
CD=0-10V Dimming Driver
(10% - 100% Dimming)
HCD=0-10V Dimming Driver (1% - 100% Dimming)
5LTHD=Fifth Light DALI Driver
(1% - 100% Dimming)
(7)
SR=Sensor Ready (1% to 100% dimming)
(11)
Number of Drivers
1=1 Driver
Packaging
U=Unit Pack
PALC=Job
Pack, in carton
SkyTrim
(6)
TB=Tahitian Blue
PG=Primary Green
SO=Storaro Orange
PL=Pearl
BR=Belladonna Rose
MR=Medium Red
ST=Straw
Product Family
S=Integrated Sensor
L=LumaWatt
Control Type
B=Sensor Mounting, No Sensor
V=Analog (0-10V) Output for Local Control
(8)
W=WaveLinx
(8)
WI=Wireless Integral
(11)
WT=Wireless Tile
(12),
(13)
Occupancy Technology
P=Passive Infrared
Sensing Technology
D=Dimming Daylight
Harvesting (Closed Loop)
Coverage Pattern
1= ~144 Square Feet
L850=5000K
Voltage
(1)
UNV=Universal Voltage
120-277
347V=347 Volt
ORDERING INFORMATION
Catalog No. Wt.
22SR-LD2-20 12 lbs.
22SR-LD2-29 12 lbs.
SHIPPING DATA