Specification

Metaltech is a registered trademark of Metaltech-Omega inc. | www.metaltech-omega.com | NOTE: Pictures and descriptions in this brochure may differ from actual product. S-CNG-NA-EN05
WWW.METALTECH.CO
1 800 363-7587
The Climb-N-Go was designed to increase worker efciency, eliminating the need to get off
the scaffold to move it. Equipped with a powerful electric motor, it is propelled by the energy
of an 18 to 21 volts battery from one of the six largest brands in the industry. Its wheels are
installed on the bottom of the scaffolding and the joystick control on the guardrail or directly
on a rung. With the Climb-N-Go, you will be able to move around your work site at height in
a safe way. In addition, it is compatible with all Metaltech Baker types scaffolding. Lighter
and more compact than a scissor lift, the Climb-N-Go does not need a freight elevator to be
moved around the job site.
• The Climb-N-Go allows the scaffolding to be
moved without having to descend to move it
• The electric motor can be installed on all
Metaltech Baker type scaffolds
• Compact and easy to transport to a job site
• Can be powered with 6 battery brands
†
: DEWALT®,
MAKITA®, MILWAUKEE®, STANLEY®, PORTER
CABLE®, BLACK & DECKER®
†
• 4,500 feet of battery life on a
single battery charge
• Quick and easy to install
• Automatic wheel lock safety system
• Multidirectional joystick control positionable
both on a rung or on a guardrail
• Moves on a job site without the need for
a freight elevator, unlike a scissor lift
• Complies with CSA S269.2-16 and
OSHA standards 1926.452(w)
CLIMB-N-GO
PRODUCT DIMENSIONS (W X D X H) 28.75 X 18 X 18 IN. (73 X 45.7 X 45.7 CM)
PACKAGE DIMENSIONS (W X D X H) 29.75 X 14.25 X 12.5 IN. (75.6 X 36.2 X 31.8 CM)
WEIGHT 55.1 LB (25 KG)
RANGE 4,500 FT (1,372 M) (tested with 20V 4.0Ah battery)
HAULING CAPACITY 330 LB (149.7 KG)
BATTERY VOLTAGE 18-21V (NOT INCLUDED)
CAN BE POWERED BY
†
DEWALT®, MAKITA®, MILWAUKEE®, STANLEY®, PORTER CABLE®, BLACK & DECKER®
†
COMPATIBLE INTERIOR
SCAFFOLDING
METALTECH BAKER TYPE SCAFFOLDING*; I-CISC, I-CISCH1, I-CISCTP, I-CISCPY,
I-CISCMT, I-CAISC AND I-BMSS
COMPLIANCE CSA S269.2-16 AND OSHA 1926.452(W)
MODEL I-CNG
UPC 778300006083
ENGINEERED
FOR MOTION
MULTIDIRECTIONAL JOYSTICK CONTROL
CAN BE INSTALLED ON ALL
METALTECH BAKER TYPE SCAFFOLDS
CAN BE POWERED WITH
6 BATTERY BRANDS
†
†
All trademarks listed above, including DeWalt, Makita, Milwaukee, Porter Cable, Black & Decker and Stanley are the property of their respective owners.
Neither Metaltech nor its products are in any way afliated with, authorized with or have been tested, certied or approved by any of the companies or
trademarks listed above, including for use with any of these companies’ batteries.
*The Climb-N-Go has been specically designed for use with Metaltech Baker type scaffolds and not with other brands.