Instructions / Assembly

45°
90°
1
Erect the scaffolding (up to three units high) by following the manufacturer instructions.
2
Install a caster into an outrigger and secure it with a lock pin. Set caster brake. Repeat with the other
casters.
3
Install an outrigger to the scaffolding side frame, insert a bent plate on each outrigger threaded stems,
each bent plate must be positioned behind the leg of the scaffolding side frame. Insert the 2 tightening
knobs on the threaded stems and firmly tighten so that the scaffolding and the outrigger are perfectly
lined up and united. Repeat with the other outriggers.
4
Adjust the outrigger angle at 45° or 90°, as required. Lock each outrigger in position with 2 locking pins.
ASSEMBLY INSTRUCTIONS
3
BOX CONTENTS
QTY. PART CODE DESCRIPTION
4 321115300 Outriggers
4 321105100 Casters
12 321103700 Locking-pins
8 321115500 Tightening knobs
8 321320400 Bent plates
3
3
4
4
4
4
2
2
3
3
3
3
ENGLISH