Product Manual

Page 17 of 29
both the AUTO Balance/Frequency Indicator and the Current (A)
Indicators are on.
ii. The Digital Meter is displaying the Current (A) setting.
iii. Turn the Parameter Adjustment Control until the Digital Meter displays the
desired Current (A) setting. This is the current setting that the operator
wants when the foot pedal is completely pressed to the maximum. The
operator will then have control of the Current (A) output from minimum
amperage to this maximum setting by varying the amount the operator is
pressing down on the foot pedal.
1. If the operator is using Pulse AC TIG, this setting will be the
maximum peak amperage, or the amperage that the welder
will pulse up to when the foot pedal is completely pressed
to the maximum.
2. As the operator varies the amount, they are pressing down on
the foot pedal, the peak amperage and background
amperage will automatically be adjusted proportionally.
e. CURRENT (A)
i. Press the Weld Parameter Selector button until the Indicator Light is On
for the Current (A) Weld Parameter.
ii. The Digital Meter is displaying the Current (A) setting.
iii. Turn the Parameter Adjustment Control until the Digital Meter displays the
desired Current (A) setting. This is the current setting that the operator
wants when the foot pedal is completely pressed to the maximum. The
operator will then have control of the Current (A) output from minimum
amperage to this maximum setting by varying the amount the operator is
pressing down on the foot pedal.
1. If the operator is using Pulse AC TIG, this setting will be the
maximum peak amperage, or the amperage that the welder
will pulse up to when the foot pedal is completely pressed
to the maximum.
2. As the operator varies the amount, they are pressing down on
the foot pedal, the peak amperage and background
amperage will automatically be adjusted proportionally.