Product Manual

Page 15 of 29
(A) Weld Parameter.
e. The Digital Meter is displaying the Current (A) setting.
f. Turn the Parameter Adjustment Control until the Digital Meter displays the desired Current
(A) setting. This is the current setting that the operator wants when the foot pedal is
completely pressed to the maximum. The operator will then have control of the
Current
(A) output from minimum amperage to this maximum setting by varying the amount
the operator is pressing down on the foot pedal.
i. If the operator is using Pulse DC TIG, this setting will be the maximum peak
amperage, or the amperage that the welder will pulse up to when the foot
pedal is completely pressed to the maximum.
ii. As the operator varies the amount, they are pressing down on the foot
pedal, the peak amperage and background amperage will automatically be
adjusted proportionally.
g. If the operator is using Pulse DC TIG, they will need to adjust the number of times per
second that the welder will pulse between the peak amperage (high end amperage)
and the background amperage (low end amperage).
i. Press the weld parameter selector button until the indicator light in front of
the Pulse Frequency (HZ) is on.
ii. The Digital Meter is now displaying the Pulse Frequency (HZ) setting.
iii. Turn the Parameter Adjustment Control until the Pulse Frequency (Hz)