Manualshelf

Product Manual

ManualsBrandsMetalman ManualsTIG WeldersMetal Man AC/DC TIG and Stick Welder - Inverter Powered, 120/230 Volt, 10-200 Amp Output
11121314151617181920
Page 14 of 29
a.
See the ASSEMBLY section for the correct welding accessories connections for DC
Stick Welding.
b.
Turn the input power switch ON.
c.
Press the button below the weld process indicators until the weld process indicator
light next to DC Stick is on.
d.
Press the button below the weld parameter indicator lights until the Indicator Light is
ON for the Current (A) Weld Parameter.
e.
The Digital Meter is displaying the Current (A) setting.
f.
Turn the Parameter Adjustment Control until the Digital Meter displays the desired Current
(A)
setting.
3. DC TIG SET-UP
a.
See the ASSEMBLY section for the correct welding accessories connections for DC
TIG Welding.
b.
Turn the input power switch ON.
c.
Press the Weld Process Selector button until the Weld Process Indicator Light next to
DC TIG is on.
i.
If the operator wants to use Pulse DC TIG, press the Weld Process Selector
until the Weld Process Indicator Light next to Pulse DC TIG is on.
d.
Press the Weld Parameter Selector button until the Indicator Light is ON for the Current