Manualshelf

Product Manual

ManualsBrandsMetalman ManualsTIG WeldersMetal Man AC/DC TIG and Stick Welder - Inverter Powered, 120/230 Volt, 10-200 Amp Output
12345678910
Page 10 of 28
5.
TIG WELDING CONNECTION – DC TIG welding is generally performed DC Electrode negative. That
means that the TIG torch and cable would be attached to the Negative (-) weld output connection and the
ground cable and clamp would be attached to the Positive (+) weld output connection. Use this same
connection when AC TIG welding. Connect the Remote Foot Pedal to the Remote connection on the lower
front panel. Connect the TIG torch gas supply line to the Gas Outlet on the lower front panel.
6.
BACK PANEL CONNECTIONS
Remote Foot
Pedal Connection
TIG Torch
Gas Connection
Power
Switch
Shielding Gas
Connection
Power
Cord