User's Manual

3 Connection

The Gateway offers a user-friendly web-based management interface for the configuration

of all the unit’s features. Any PC directly attached to the unit can access the management

interface using a web browser, such as Internet Explorer, Firefox, Chrome, and etc.

Hard Connection

1. Connect your broadband modem (Cable/DSL) to Ethernet port 1 on the Gateway.

2. Connect the Ethernet port of your PC to Ethernet port 2 on the Gateway.

3. Connect the power supply to the Gateway and power on it.

System Login

You can access the Web Application from any computer connected to the Gateway via the

Ethernet port.

1. Open your web browser. Type the default IP address of the Gateway

http://10.10.10.10 and press Enter.

2. A login screen displays. Enter user name as mtladmin and password as

@mtladmin@ (case sensitive). Click OK.