Manual

Operating Instructions – MOVIMOT® MM03C - MM3XC
5
1
Important Notes
1 Important Notes
Safety and warn-
ing instructions
Always follow the safety and warning instructions contained in this publication!
Other applicable
documents
• Operating Instructions "DR/DT/DV AC Motors, CT/CV Asynchronous Servomotors"
• If MOVIMOT
®
is used for emergency stops, the supplemental documentation
"Safe Disconnection for MOVIMOT
®
" must be observed. Only those compo-
nents may be used in safety applications that were explicitly delivered with this
design by SEW-EURODRIVE!
Intended usage • These MOVIMOT
®
drives are intended for industrial equipment. They comply with
the applicable standards and regulations and meet the requirements of the Low Volt-
age Directive 73/23/EEC.
• The use of MOVIMOT
®
for hoist applications is limited!
• Technical data and information about the permitted conditions where the unit is used
can be found on the nameplate and in these operating instructions.
• It is essential to observe this specified information!
• Do not start up the unit (take it into operation in the designated fashion) until you have
established that the machine complies with the EMC Directive 89/336/EEC and that
the conformity of the end product has been determined in accordance with the Ma-
chinery Directive 89/392/EEC (with reference to EN 60204).
Electrical hazard
Possible consequences: Severe or fatal injuries.
Hazard
Possible consequences: Severe or fatal injuries.
Hazardous situation
Possible consequences: Slight or minor injuries.
Harmful situation
Possible consequences: Damage to the unit and the environment.
Tips and useful information.