Manual

Operating Instructions – MOVIMOT® MM03C - MM3XC

Connection between MOVIMOT® and motor mounting close to the motor

Electrical Installation of MOVIMOT® Standard Design

5.6 Connection between MOVIMOT

and motor mounting close to the motor

If the MOVIMOT

inverter with option P2.A is mounted close to the motor, the connec-

tion to the motor uses a pre-fabricated cable. The following designs are possible on the

MOVIMOT

side:

• A: MM../P2.A/RO.A/APG4

• B: MM../P2.A/RE.A/ALA4

The APG 4 design results in the following connection options to the motor, dependent

upon the hybrid cable used:

Design A1 A2 A3 A4

MOVIMOT

APG4APG4APG4APG4

Motor Cable gland/termi-

nals

ASB4 APG4 IS

Hybrid cables 0 593 231 9 0 593 076 6 0 186 741 5 0816 325 1

쑶

0816 326 X 쑶

0593 278 5 댴

0593 755 8 댴

See also... page 34 page 34 page 35 page 35

52198AXX

[1] Connection via terminals

ASB4

APG4

[1]

APG4