OSHA Material Safety Data Sheet

METACAULK
®
835+
Page 5
Se c t i o n 9 – PH ySi c a l a n d cH e m i c a l Pr o Pe r t i eS
Boiling point: Not available
Specic gravity (H20 = 1): 1.31 – 1.33
Vapor pressure (mmHg): Less than 5 mmHg
Melting point: N/A
Vapor Density (Air = 1): N/A
Evaporation rate (Ethyl Acetate = 1): > 1
Appearance/Odor: Viscous liquid, smooth self-leveling sealant
Solubility in water: Not available
Volatile Organic Compounds (VOC) Content: 25 grams per liter, < 3% by weight
(Chemically Curing Sealants and Caulks – CARB Method 310:
VOC less water, less exempt compounds and LVP-VOCs)
Flash point: None
Lower explosion limit: None
Upper explosion limit: None
Ketoxime Silane
ACGIH TLV N/D ppm
OSHA PEL N/D ppm
Calcium Carbonate
ACGIH TLV 10 mg/m3
OSHA PEL 15 mg/m3
Carbon Black
NIOSH REL 3.5 mg/m3
OSHA PEL 3.5 mg/m3
Respiratory Protection (Specify Type): None required.
Ventilation − Local Exhaust: Acceptable.
Special: N/A
Mechanical (General): Preferable.
Other: N/A
Protective Gloves: Wear rubber gloves.
Eye Protection: Safety glasses (ANSI Z-87.1 or equivalent)
Other Protective Clothing Or Equipment: Coveralls recommended.
Work/Hygienic Practices: Where use can result in skin contact, wash exposed areas thoroughly before eating,
drinking, smoking, or leaving work area. Launder contaminated clothing before reuse.