Submittal Sheet

R50101 1217
10. LIMITED WARRANTY
RectorSeal, LLC makes the Limited Express Warranty that when the instructions for storage and handling of our products are followed we warrant our products to be free from defects. THIS LIMITED
EXPRESS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PAR-
TICULAR PURPOSE, AND OF ANY OTHER OBLIGATION ON THE PART OF RECTORSEAL, LLC. The sole remedy for breach of the Limited Express Warranty shall be the refund of the purchase
price. All other liability is negated and disclaimed, and RectorSeal, LLC shall not be liable for incidental or consequential damages.
Suggestions and recommendations covering the use of our products are based on our past experience and laboratory findings. However, as we have no control as to the methods and conditions
of application, we only assume responsibility for the uniformity of our products within manufacturing tolerances.
Metacaulk
®
INTUMESCENT SLEEVE
within wall. The ends of the sleeve
should extend the same distance
beyond each side of the floor or
wall surface.
7) The Sleeve requires a minimum
0.25 in. (6 mm) annular space.
Following sleeve installation, a
backing material, such as backer
rod compressed into the space
may be used. Recess backing
material to accommodate the
required depth of sealant.
8) Fill annular space cavity with the
required depth of firestop sealant.
Consult UL Directory for complete
instructions and system listings
5. Testing Data
Metacaulk
®
Intumescent Sleeves
are classified by Underwriters
Laboratories as a Firestop Device.
For specific test criteria, see the
UL Fire Resistance Directory
or call RectorSeal. Metacaulk
®
Intumescent Sleeves were tested
at a minimum .01 inches (2.5
Pa) of water positive pressure
in accordance with UL 1479
(ASTM E814) test standards.
Tested to CAN/ULC-S115 (Fire
Tests of Firestop Systems) test
standards. Complies to Required
Environmental Exposure Testing
of Accelerated Aging and High
Humidity as per UL 1479 Fire Test
of Through-Penetration Firestops.
6. Storage & Handling
Metacaulk
®
Intumescent Sleeve
should be stored in a dry
place. Keep product stored
under protective cover in original
container. Products have a
minimum shelf life of 2 years
subject to re-inspection there
after. A stock rotation program is
recommended.
7. Availability
The 234 Metacaulk
®
Intumescent
Sleeves can be used on a 2" (5
cm), 3" (8 cm) or 4" (10 cm) pipe.
The dimensions of the 234 Sleeve
is 17" x 8" (43 cm x 20 cm). The 68
Sleeve can be used on a 6" (15
cm) or 8" (20 cm) (trade diameter)
plastic pipe. The dimensiosn of
the 68 sleeve is 31" x 10" (79 cm
x 25 cm).
8. Limitations
Not for use in outdoor
environments where long-term
exposure to rainfall or saltwater
spray may occur. No other
limitations known if used as
directed.
9. Cautions
KEEP OUT OF REACH OF
CHILDREN.
For additional technical service,
call: 713-263-8001 or 1-800-231-3345
fax: [phone] or 1-800-441-0051
RECTORSEAL
2601 Spenwick Drive, HOUSTON, TEXAS 77055
WWW.RECTORSEAL.COM
WWW.METACAULK.COM
Description Part No. Trade Size Outer Diameter
234 Sleeve 66584 2.0 in. (5.08 cm) 2.375 in. (6.03 cm)
3.0 in. (7.62 cm) 3.5 in. (8.9 cm)
4.0 in. (10.16 cm) 4.5 in. (11.4 cm)
68 Sleeve 66582 6.0 in. (15.24 cm) 6.625 in. (16.8 cm)
8.0 in. (20.32 cm) 8.625 in. (21.9 cm)