Product Overview

Application • Firestop through penetrations with a
single sleeve • Ideal for combustible pipes
penetrating a concrete fluted deck assembly
Recommended for • PVC • cc-PVC
• CPVC • FRPP • PP • ABS • Aquatherm
• Rigid non-metallic conduit installations
Description Qty.
For 2", 3" & 4" Pipe
6
For 6" & 8" Pipe
1
FEATURES
• No steel bolts or fasteners
• Can be retrofitted
• Flexible
US Patent No. 6,207,085
Intumescent Sleeve
Firestop Device
Contact: RectorSeal
®
713-263-8001 800-231-3345 713-263-7577 800-441-0051 www.rectorseal.com
P F W
1. Using the Installation Chart, select proper size.
2. Determine the number of Sleeves required for
application.
3. Determine method of fastening to be used (electrical,
duct, berglass tape, pop rivets, hose clamps or tie
wires).
4. For installation, wrap the sleeve around pipe above or
below oor with intumescent side facing pipe,
allowing bare metal end to overlap.
5. Secure the sleeve around pipe with either electrical
tape, duct tape, berglass tape, pop rivets, hose
clamps or tie wires.
6. Push the sleeve through opening/ assembly so it is
even with oor and/or ceiling or centered in wall.
Consult UL design for specic installation.
7. Fill annular space with the depth of sealant required.
Description
2” 3” & 4” Sleeve Trade Size 2.0 in. (5.08 cm) - 4.0 in. (10.16 cm)
Outer Diameter 2.375 in. (6.03 cm) - 4.5 in. (11.4 cm)
6” & 8” Sleeve Trade Size 6.0 in. (15.24 cm) - 8.0 in. (20.32 cm)
Outer Diameter 6.625 in. (16.8 cm) - 8.625 in. (21.9 cm)
A
B
C
D
A. One or 2 layer
gypsum wall-
board assembly
B. Max 8 in
(203mm) PVC,
CPVC, or rigid
non-metallic pipe
C. Sleeve secured
with electrical
tape, duct tape,
berglass tape,
hose clamps,
pop rivets or tie
wires
D. Sealant at a
min. 5/8”
(16 mm) depth
Plastic pipe through Gypsum Wall Assembly - 1 or 2 hour
(UL W-L-2185)
Plastic pipe through Concrete Floor Assembly - 2 hour
(UL F-A-2217)
A. Concrete oor capable of
2 hr rating
B. Max 8 in (203mm) PVC,
CPVC, or 6 in. RNC
C. Sleeve secured with ber-
glass tape, hose clamps
or pop rivets
D. Sealant at a min. 1/2”
(13 mm) depth
A
B
C
D
C/IS-L-14